Teledyne 4060 manual Pin out of 50 pin D-Sub Connector, 2.10 RS-232 Port

Installation Series 4060

Table 3-7: Pin out of 50 pin D-Sub Connector

pin #	Description	pin #	Description
1		26
2		27
3	+ Output 4-20 ma - Channel 2	28	Alarm 1 C Contact
4	- Output 4-20 ma - Channel 2	29
5	+ Output 4-20 ma – Channel 1	30
6	- Output 4-20 ma – Channel 1	31
7	- Output 0-1 v (Channel 1)	32	Exhaust Solenoid Hot
8	+ Output 0-1 v (Channel 2)	33	Sample Solenoid Hot
9		34	Range 4 Contact/ not used
10	Remote Span +	35	Range 4 Contact/not used
11		36	Alarm 3 NC Contact
12	Remote Span -	37	Alarm 3 NO Contact
13		38	Range 1 Contact
14		39	Range 2 Contact
15		40	Calibration Contact
16	Span Solenoid Return	41	Calibration Contact
17	Span Solenoid Hot	42	Alarm 2 NC Contact
18	Range 3 Contact	43	Alarm 2 NO Contact
19	Range 3 Contact	44	Alarm 2 C Contact
20	Alarm 3 C Contact	45	Alarm 1 NC Contact
21	Range 1 Contact	46	Alarm 1 NO Contact
22	Range 2 Contact	47
23	- Output 0-1 v (Channel 2)	48	Exhaust Solenoid Return
24	+ Output 0-1 v (Channel 1)	49
25		50	Sample Solenoid Return

3.3.2.10 RS-232 PORT

The digital signal output is a standard RS-232 serial communications port used to connect the analyzer to a computer, terminal, or other digital device. It requires a standard 9-pin D connector.

Input: The input functions using RS-232 that have been implemented to date are described in Table 3-8.

36 Teledyne Analytical Instruments