Ignition Controlled Door Locks On/Off (RED) - When on, the doors will lock three seconds after the ignition is turned on and unlock when the ignition is turned off.
Uncut – ignition controlled door locks on
Cut – ignition controlled door locks off
Diesel Mode (BLUE) - Cut this loop if you have a diesel vehicle. When cut the remote start will start the engine about 30 seconds
after pressing the 
button once.
Uncut – Gas Mode
Cut – Diesel Mode
FAD/RAP Cancellation (GREEN/BLACK) - This loop controls when the Green/Black (H1/7) wire outputs a negative pulse either before or after the remote start is active. Uncut the H1/7 wire will pulse negative prior to remote start, this is normally used as a Factory Alarm Disarm (FAD) output. When this loop is cut, the Green/Black (H1/7) wire outputs a negative pulse after the remote start shuts down, this is normally used to disable vehicles with Retained Accessory Power (RAP) (e.g. the radio stays powered until the doors are opened). Call Directed Technical Support if your vehicle has the RAP feature.
Uncut – FAD
Cut – RAP Cancellation
Voltage Mode/Tachometer Mode - Default is voltage mode. The control module will automatically look at the tachometer input
© 2 0 0 6 D i r e c t e d E l e c t r o n i c s | 51 |