Maxi-Cosi THE SAFE WORLD OF I manual Installing the MAXI-COSI Cabriofix in Your CAR

0114_GBA_cabriofix_I_BW 15-03-2006 12:30 Pagina 13

4.INSTALLING THE MAXI-COSI CABRIOFIX IN YOUR CAR

4.1Installing the Maxi-Cosi CabrioFix with a safety belt

The Maxi-Cosi CabrioFix can be fitted safely on almost all forward-facing seats in the car using the existing seat belts. However, the belts are fitted so far forward on some seats that proper installation is not possible. If this is the case, try another seat.

In some cases, the buckle of the safety belt may be too long and therefore sits too high against the base of

the Maxi-Cosi CabrioFix, making it difficult to install the Maxi-Cosi CabrioFix securely. If this is the case, GB choose another position in the car. Contact your supplier with any questions.

•	Installation with 3-point safety belt	Yes
•	Installation with 2-point safety belt	No
• On passenger seat		Yes
•	On left/right side of back seat	Yes
•	In middle position of back seat	Yes*
•	Belt routing marking	Blue
•	Frontal airbag	No
•	Side airbag	Yes

*if there is a seat belt present in the middle position of the back seat.

9Important! Do not mix up hip (9,1) and shoulder part (9,2)!

10• Place the Maxi-Cosi CabrioFix in a rearward-facing position on the seat, therefore with the back forward facing. The carrying handle must be locked in an upright position (10).

11• Thread the lap section of the seat belt across the front (foot end) between the shell and two blue belt hooks (11).

Instructions for use 13