Bosch Appliances UPH-2D Keyboard Commands List, Setup and Configuration, Auxiliary Connections

High Speed Pan/Tilt System					Moving Around the Menus en 33
	MAIN MENU
	1	- LANGUAGE		
	 2	- DISPLAY SETUP		
	3	- MOTION PARAMETERS		
	4	- CAMERA PARAMETERS		
	5	- LOAD DEFAULT CONFIG		
	6	- SETUP INFO		
	Fig. 10.1 Accessing the Main Menu - AUX On 200
	MODE
		ALC	2
		ENHANCE
		COLOR
		BLC	OFF
		VMD	OSD
		MODE ID	TRAFFIC
		DEFAULTS
			EXIT
	Fig. 10.2 Accessing the DinionXF camera Setup Menu - AUX On 46
	(screen may differ depending on the camera type)
10.1	Keyboard Commands List

Setup and Configuration

Open OSD configuration: AUX ON - 200 - Enter

DinionXF main menu on: AUX ON - 46 - Enter

DinionXF installation menu on: AUX ON - 801 - Enter

Receiver reset/home: AUX ON - 911 - Enter

Receiver offset re-calibration: AUX ON - 204 - Enter

Auxiliary Connections

Relay number 2 activation: AUX ON - 65 - Enter

Relay number 2 de-activiation: AUX OFF - 65 - Enter

Wiper start: AUX ON - 202 - Enter

Wiper stop: AUX OFF - 202 - Enter

Washer start: AUX ON - 201 - Enter

Presets

Store preset position: Show Shot - n - Enter (n = 01 - 99, i.e. 99 presets)

Move to a preset position: Show Shot - n - Enter (n = 01 - 99, i.e. 99 presets)

Erase preset position: Show Shot - 9n - Enter (n = 01 - 99, e.g. to erase preset position #31, then push Show Shot - 931 - Enter)

Standard preset patrol start: AUX ON - 8 - Enter

Standard preset patrol stop: AUX OFF - 8 - Enter

Recalibrate presets: AUX ON - 204 - Enter

Autopan (requires left and right limits to be set in OSD)

Autopan start: AUX ON - 1 - Enter

Autopan stop: AUX OFF - 1 - Enter

Bosch Security Systems Instruction Manual F01U.073.990 Version 1.0 2007.07