Bosch Appliances UPH-3D, UPH-2D, UPH-Z instruction manual Camera Parameters, Alarms

50 en Configuring the System High Speed Pan/Tilt System

11.3.5Alarms

The Alarms menu is used to set up the action and duration of the alarm when it is activated.

MOTION PARAMETERS MENU 1 - SPEED

2 - LIMITS

3 - PRESET/PATROL/AUTOPAN

4- WIPER-WASHER 5 - ALARMS

ALARMS MENU 1 - ALARM 1

2 - ALARM 2

3 - ALARM 3

4 - ALARM 4 5 - ALARMS TEST

ALARM MENU
 1	- ACTION:	: IR FILT
2	-
3	-	:
4	- SHOW MESSAGE	: NO
5	- DURATION	: 00000
6	- TXT: Test Alarm 1	:

TEST ALARMS MENU
1 - ALARM 1	: OFF
2 - ALARM 2	: OFF
3 - ALARM 3	: OFF
4 - ALARM 4	: OFF

Fig. 11.18 Alarms Menu

	Feature	Description	Default	Options
	ACTION	Enables the action to take place	DISABLE	DISABLE,
		when the alarm is activated.		SCAN,
				RELAY,
				AUTOPAN,
				PATROL,
				IR FILT
	SHOW MESSAGE	Enables the display of an alarm	NO	YES, NO
		message.
	DURATION	Length (in seconds) of alarm mes-	00000	00000 -
		sage display (0 means for the com-		01000
		plete duration of the alarm).
	TXT: Test Alarm 1	Text associated with the alarm.
	ALARMS TEST	Displays the status of Alarm Inputs
		1, 2, 3, and 4; either ON or OFF
		status (not user selectable).
11.4	Camera Parameters

There are some differences between the UPH-Z Series, and the UPH-2D and UPH-3D Series. Figure 11.4.1 refers to the camera parameters of the UPH-2D and UPH-3D Series, i.e. units

with DinionXF cameras and motorized zoom lenses. Figure 11.4.2 refers to the camera module parameters of the UPH-Z Series.

F01U.073.990 Version 1.0 2007.07 Instruction Manual Bosch Security Systems