Display Setting
Adjustment to display on the DISPLAY menu
1 Press [MENU] to display the menu display.
STILL IMAGE
(Setting range: 11types, Default: All)
Customize the Display (Customize Function)
You can edit the moving images and still images that are initially stored in the unit. You also can use the data that is downloaded from the Panasonic Web site and the data that is stored with a digital camera or other devices and processed with exclusive software, IMAGE STUDIO. See “Notes on Customize function” (a page 38) as well.
Note: Visit Panasonic Web site (http://panasonic.co.jp/pas/en/software/customize/index.html) for details.
|
| For using the remote | |||
|
|
|
| ||
|
| control, hold down |
|
| |
|
| [SEL] (MENU) for 2 |
|
| |
|
| sec. or more. |
|
| |
| 2 Press []] or [[] to display the | ||||
|
| DISPLAY menu. |
|
| |
| 3 Press [}] or [{] to select a function to | ||||
|
| be adjusted. |
|
| |
| 4 Press [BAND] |
|
| ||
|
| (SET) to confirm |
| ||
|
|
|
| ||
|
| the display. |
|
| |
Display | 5 Adjust the setting value. |
| |||
| 6 Press [BAND] (SET). |
|
| ||
Menu | 7 Press [MENU] to confirm the | ||||
| adjustment. |
|
| ||
| For using the remote control, hold down [SEL] | ||||
DISPLAY |
| (MENU) for 2 sec. or more. |
|
| |
|
|
|
|
| |
| GRAPHIC PATTERN |
|
| ||
| (Setting range: 6 types, Default: All) |
|
| ||
| Switching by []] or [[] |
|
| ||
| All: |
| Sequential display from pattern A to D. | ||
| Pattern |
|
| ||
| S.A.: | ||||
Switching by []] or [[]
All: Sequential display from pattern 1 to 10
CONTRAST
(Setting range: 1 to 5, Default: Contrast 3)
[[]: Tilting up view angle
[]]: Tilting down view angle
CLOCK ADJ
Note: Adjust the clock when “ADJUST” appears on the display.
[[]: Adjusting minutes
[]]: Adjusting hours
[}]: Forward
[{]: Backward
Notes:
¡The graphic pattern and still image are changeable. (a page 37)
¡If corrupted data is selected, “DISPLAY FILE INCOM- PLETE” appears. (a page 38)
CUSTOMIZE Menu Display
Preparation:
Put the
1 If there is a disc inside, take out the disc.
2 Press [SRC] to
select the CD | SRCSRC |
mode. |
|
3 Hold down [SEL] for 4 sec. or more to display the menu screen.
4 Load a
Note:
¡It may take time for the unit to identify the CD- R/RW.
¡Discs recorded by the packet writing software are not supported.
5 Select an item to be customized.
[}][{]: Select
[BAND] (SET): Confirm
Note: To exit the customize menu, hold down [SEL] 4 sec. or more.
GRAPHIC PATTERN
Moving image (graphic pattern) data (a page 36)
STILL IMAGE
Still image data (a page 36)
OPENING MESSAGE
Moving image at power on (a page 14)
CLOSING MESSAGE
Moving image at power off (a page 14)
6 Select a file.
[}][{][]][[]:Select
[BAND] (SET): Confirm
Notes:
¡Files are automatically identified by their exten- sions, and target files are displayed.
¡If ”BACK” is selected, the screen of step 5 appears.
7 For a moving image file or still image file, select where to save the file.
[]][[]: Select
[BAND] (SET): Confirm
Notes:
¡New data overwrites existing data.
¡If “BACK” is selected, the screen of step 6 appears.
8 Confirm the changed item.
[]][[]: Select
[BAND] (SET): Confirm
Customization is performed. Do not turn off the power in
Note: If “NO” is selected, the screen of step 5 appears.
9 Hold down [SEL] 4 sec. or more.
The CD mode comes back. Press the [OPEN] but- ton to eject the disc.
English
Display Setting, Customize the Display (Customize Function)
36 |
| 37 | ||
|
|
|
|
|