Pioneer DEH-1050E operation manual Built-in Player

Section

02Operating this unit

Tuning in strong signals

Local seek tuning lets you tune in only those radio stations with sufficiently strong signals for good reception.

1Press FUNCTION to select LOCAL.

2Press a or b to turn local seek tuning on or off.

3Press c or d to set the sensitivity. FM: LOCAL 1—LOCAL 2—LOCAL 3—

LOCAL 4

AM: LOCAL 1—LOCAL 2

The LOCAL 4 setting allows reception of only the strongest stations, while lower settings let you receive progressively weaker stations.

2To perform fast forward or reverse, press and hold c or d.

3To skip back or forward to another track, press c or d.

Notes

!Read the precautions with discs and player on page 10.

!If an error message such as ERROR-11 is dis- played, refer to Error messages on page 10.

Repeating play

Repeat play lets you hear the same track over again.

1 Press FUNCTION to select RPT.

Storing the strongest broadcast frequencies

BSM (best stations memory) lets you automa- tically store the six strongest broadcast fre- quencies under preset tuning buttons 1 to 6. Once stored you can tune in to those frequen- cies with the touch of button.

!Storing broadcast frequencies with BSM may replace broadcast frequencies you have saved using buttons 1 to 6.

1Press FUNCTION to select BSM.

2Press a to turn BSM on.

Six strongest broadcast frequencies will be stored in the order of their signal strength.

#To cancel the storage process, press b.

Built-in Player

Playing a disc

1Insert a CD into the CD loading slot. Playback will automatically start.

#Be sure to turn up the label side of a disc.

#After a CD has been inserted, press SOURCE to select the built-in CD player.

#You can eject a CD by pressing EJECT.

2Press c or d to select the repeat range. DSC – Repeat all tracks

TRK – Repeat just the current track

# If you perform track search or fast forward/re-

verse, repeat play is automatically cancelled.

# To return to the normal display, press BAND.

Playing tracks in random order

Random play lets you play back tracks on the CD in a random order.

1Press FUNCTION to select RDM.

2Press a or b to turn random play on or

off.

When random play is on, RDM appears in the

display.

# To return to the normal display, press BAND.

Scanning tracks of a CD

Scan play lets you hear the first 10 seconds of each track on the CD.

1 Press FUNCTION to select SCAN.

6 En