700tmOM 8/24/06 11:15 AM Page 38
Workout Programs (continued)
•Or press “ENTER” to enter program setup mode The dot matrix & data displays will take you through the program setup mode step by step as below: (same as Manual program setup)
o Enter Age
o Enter Weight o Enter Time
During the Program
As soon as the “ENTER” or “START” key is pressed, the Warm Up will be active. See Warm Up mode section for details.
Data Display
•When Warm Up mode is completed, this program will begin; the data display window will display the default workout data of “time, distance, calories & heart rate”. Press “Select” button to switch the data displays.
•Time display will show the selected program time and count down.
•Speed display will start with speed of 3.0 mph.
•Incline display will start with incline of 0%.
Adjustment
•Press Speed “UP/DOWN” key or numeric quick key to adjust the speed any time during the program. The speed of the remaining segments will be updated to the new setting and the dot matrix window will update the speed profile accordingly as well.
•Press Incline “UP/DOWN” key or numeric quick key to adjust the incline any time during the program. The incline of the remaining segments will be updated to the new setting proportionally and the dot matrix window will update the incline profile accordingly as well.
•Press “SELECT” key next to dot matrix window to switch the profile display.
Ending the Program
•When selected program time is up, this program will end and Cool down will be active. See Cool down section for details.
•If STOP key is pressed twice during program run mode, the cool down mode will end and enter workout summary mode.
•There will be a beep sound to indicate the program ended.
Pause, Reset, Restart, or Switch the program
See Console section for details.
5K TRAIN & 10K RUN
Getting Started
The 5K Train & 10K Run programs are the distance training programs. It sets the dis- tance target to be 5000m or 10,000m and you can set up your pace by entering the
36 | 700 Tm Owner’s Manual |
|
|