T80 / T85

O W N E R ’ S M A N U A L • T 8 0 T 8 5

3.Secure the front support to the running base with screws (C) and washers (D).

4.Connect the wire coming out of the left handrail with the connector in the running base. Secure the coiled cable to the lower frame with the coupler and the screw so that the coiled part of the cable remains visible between the coupler and the connector. Remove the styrox foam pieces from under the running base. Remove the styrox foam pieces from under the running belt.

5.Turn the transportation wheels back to the sides and lift the running base up. Cut the H-frame and the gas spring ribbons and lower the H- frame with the transportation wheels onto the floor. Lock the running base into the storage position (see Moving and Storage). Push the running base forward to take weight off the base and secure both gas springs to the lower frame with the nylock nuts (E). NOTE! Do not secure the nuts too tight so that the gas spring coupler can move freely!

6.If the treadmill does not lock properly, push the running base forward until the transportation wheels lift off the floor to take weight off the base, and then loosen the screws (2 on each side) on the H-frame mounting pieces. Tighten the screws again: the H-frame will now

lock into the correct position.

7.Move the running base (see Moving and Storage). Lower the running base onto the floor and make sure that the running base is steady. If the treadmill feels unstable, use the adjustable feet at the back of the treadmill under the running base to stabilize the treadmill: undo the fastening nuts on the adjustable feet and adjust the height of the feet. Secure the fastening nuts.

Open both packages and remove all protective styrox foam pieces.

HANDRAILS

Secure the handrails to the running base with four hex screws (A) and washers (B) from the outside and two hex screws (C) and washers (D) from the inside. Be careful not to damage the wire coming out of the left handrail. NOTE! Do not tighten these bolts until the handlebar and console have been secured.

HANDLEBAR AND CONSOLE

Turn the sliders located at the sides of the handlebars downward so that you can attach them with another screw (E) through the lower hole of the handlebar.

NOTE! Attach the screws as loosely as possible. Do not remove the screws on the sliders. Place the handlebar/ console unit on the handrails so that the sliders fit the handrail grooves. Connect the wire coming out of the left handlebar with the connector in the console and push the connected wire inside the handlebar. Push the handlebar/console unit onto the handrail ends and tighten all the hex screws on the sliders. Fasten the handrail bolts. Remove the protective film from the display.

T85, T80 specifications

The Tunturi T80 and T85 are fitness machines that have garnered attention for their modern designs and advanced features. As part of Tunturi's renowned line of treadmills, the T80 and T85 cater to diverse fitness enthusiasts, from beginners to seasoned athletes.

One of the standout features of both models is their robust construction, designed to withstand intensive workouts. With a durable frame and quality materials, these treadmills can support various body types and sizes, ensuring stability during high-speed runs or intense workouts.

The T80 model is equipped with a powerful motor that offers a continuous output of around 2.5 horsepower, enabling users to reach speeds of up to 16 km/h. This makes it suitable for everything from walking to fast-paced running sessions. Meanwhile, the T85 takes it a step further with its 3.0 horsepower motor. Both models come with a spacious running surface, providing ample room for comfortable strides.

An essential aspect of any treadmill is its cushioning system, and Tunturi pays particular attention to this feature. The T80 and T85 utilize innovative cushioning technologies that reduce joint impact, allowing users to train longer without discomfort. This is particularly beneficial for those recovering from injuries or looking to avoid long-term joint stress.

In terms of technology, both treadmills boast user-friendly LCD displays that track essential workout metrics, including time, distance, speed, and calories burned. The integrated heart rate monitor provides real-time feedback, ensuring users can optimize their training intensity. Furthermore, these treadmills are equipped with various pre-set workout programs, catering to different fitness levels and goals, from weight loss to endurance training.

Connectivity is another highlight. Both the T80 and T85 feature Bluetooth capabilities, enabling users to sync their devices and access fitness apps. This integration enhances the workout experience with additional metrics and virtual training programs, making workouts more engaging and motivating.

Lastly, both models are designed for easy folding and storage, making them ideal options for home gym setups where space is a concern. With their combination of durability, technology, and user-oriented features, the Tunturi T80 and T85 treadmills present excellent choices for anyone looking to enhance their fitness routines.