Electrolux Neptune operating instructions POP-UP Windows, Stain treat 24 min, Min, Library Stain

CHECK THESE POINTS IF YOUR MAYTAG NEPTUNE® TL CLOTHES WASHER...

Won’t Fill

Won’t Tumble

Lid Locked Shut; Will Not Open

Is Noisy

The Touchscreen is Fading

Freshening

Your Washer

•Be sure the lid is closed.

•Plug cord into a live electrical outlet.

•Check fuse or reset circuit breaker.

•Open and close the lid, then push the Start/Pause touchpad.

•Turn both faucets on fully.

•Straighten inlet hoses.

•Disconnect hoses and clean screens. Hose filter screens may be plugged.

•Check fuse or reset circuit breaker.

•Open and close the lid, then press the Start/Pause touchpad. For your safety, the clothes washer will not tumble or spin unless the lid is closed.

•Some cycles are designed to tumble then pause. This is normal.

•Press the Start/Pause touchpad to stop the washer.

•It may take up to 2 minutes for the lid lock mechanism to disengage.

•A locked lid may not unlock during a power outage.

•Clothes washer should be leveled properly as outlined in installation instructions.

•Check that the leveling leg lock nuts are tightened.

•Be sure rubber feet are installed on leveling legs.

•Weak floors can cause vibration and walking.

•The load may be unbalanced.

•For information on normal operating sounds, see page 23.

•The contrast may need to be adjusted. Select the Help option pad then “select preferences”. Touch “change monitor contrast”. Using the arrows move the block to the left or right to improve the visual quality of the touchscreen.

•See Cleaning the Interior, page 19.

POP-UP WINDOWS

In an effort to better understand what is occurring with your Maytag Neptune® TL Washer, pop-up windows may appear. These windows are there to inform you of what is happening and what actions may need to be taken. Examples of these pop-up windows are below.

est. time:		main wash
your cycle		lid unlocked
	The cycle is complete. OPTIONSThe load
cotton
	may now be removedmax. extract spin
fabrics		end chime medium
		Auto Temp ON
hot wash
cold rinse

stain treat	ok
24 min	save as a favorite

	Press "Start/Pause" or				est. time:		40		main wash
	change selections below.				your	cycle			lid locked
	Excess suds were detectedOPTIONS					The washer is checkingOPTIONSthe lid
	cotton					cotton
	during recent cycles. Try using			spin		lock system and willmaxunlockextract				spin
			max extract
	fabricslow sudsing or less detergent.					fabrics				medium
			end chime medium			shortly. This is normal.end chime
	See the help section on User's								Auto Temp	ON
			Auto Temp ON
	Guide for more information.				hot wash
hot wash
cold rinse					cold rinse
		ok					ok
stain treat					stain treat
24	min		save as a favorite		24			save as a		favorite

Home

A power failure occured during
the current cycle. Press
cycle"Start/Pause" to continuefavoritethis
cycle.		cycles
library
stain	ok	set your
		cycle

After you have read the message, touch “ok” and the pop up window will disappear.

For further assistance, call Maytag Customer Service toll-free at 1-888-4-MAYTAG (1-888-462-9824).

U.S. customers using TTY for deaf, hearing impaired or speech impaired, call 1-800-688-2080.

22