the inside important
To extend the life of your steam station and to avoid a build up of scale, it is essential that you rinse out the boiler after every 10 refills or once a month. If you live in a hard water area increase the frequency of cleaning. Do not use chemical descaling agents or vinegar as they may damage your appliance.
●Clean the boiler making sure it has been allowed to cool overnight first. Turn the steam station upside down
and pull back the flap covering the boiler cap .
Unscrew the boiler cap using a coin and empty out any water. Add one cup of tap or filtered water and shake the appliance then empty out all the water. Repeat this operation until the water from the boiler comes out clear and clean.
When cleaning is finished pour 500ml fresh tap or filtered water into the boiler and screw the boiler cap back on again without using excessive force. Replace the cover. The unit is now ready to use. important: Aways add 500ml water direct to the boiler after cleaning to prevent damaging the steam station.
service and customer care
●If the cord is damaged it must, for safety reasons, be replaced by KENWOOD or an authorised KENWOOD repairer.
If you need help with:
●using your appliance
●servicing or repairs
Contact the shop where you bought your appliance.
6