Maytag PAVT-1 warranty Troubleshooting

Troubleshooting

Fills with the Wrong	•	Turn both faucets on fully.
Temperature Water	•	If equipped with a temperature selector knob, be sure it is set directly on a
		temperature setting and not between settings.
	•	Make sure temperature selection is correct.
	•	If Auto Temperature Control (select models) is selected, cold water may feel warmer
		than cold water from the tap. (See page 7-8).
	•	Make sure hoses are connected to correct faucets and inlet connections. Be sure
		water supply is regulated correctly. Flush water line before filling washer.
	•	Check the water heater. It should be set to deliver a minimum 120° F (49° C) hot
		water at the tap. Also check water heater capacity and recovery rate.
	•	Disconnect hoses and clean screens. Hose filter screens may be plugged.
Cycle Selector	•	Extra Rinse (select models) is selected.
Advances Through Off

For further assistance contact Maytag ServicesSM, Maytag Customer Assistance:

U.S. 1-800-688-9900 or Canada 1-800-688-2002.

U.S. Customers using TTY for deaf, hearing impaired or speech impaired, call 1-800-688-2080.

14