![](/images/new-backgrounds/1255280/25528015x1.webp)
![](/images/new-backgrounds/1255280/25528015xi2.webp)
![](/images/new-backgrounds/1255280/25528015xi3.webp)
Using the Controls – Speed Select Models
STEP 1
Select Water Level
Determine the selected setting based on clothes load size. On select models, the infinite control allows you to select a specific setting or anywhere in between.
It may become necessary, due to bulky fabrics, to adjust the water level after agitation begins. To adjust the water level, turn the control to reset and then back to the desired setting.
WATER LEVEL SETTING | LOAD SIZE |
|
|
Mini | 1/4 Full |
|
|
Medium | 1/4 – 1/2 Full |
|
|
Large | 1/2 – 3/4 Full |
|
|
Oversize | 3/4 – Full |
|
|
Note
• Items must circulate freely for best results.
STEP 2
Select Wash/Rinse Temperature
Your washer gives you a choice of hot, warm or cold water for washing and cold or warm water (select models) for rinsing. Use the chart below as a guide.
WASH/RINSE | LOAD TYPE | |
TEMPS |
| |
Hot/Cold | White and heavily soiled, | |
items | ||
| ||
|
| |
Warm/Cold | Moderately soiled, colored items; | |
most wrinkle free items | ||
| ||
Warm/Warm | Delicate items | |
|
| |
Cold/Cold | Brightly colored, lightly soiled | |
items; washable woolens | ||
| ||
|
|
Automatic Temperature Control (A.T.C.) (select models) provides the optimal wash water temperatures for cleaning. To save energy, Automatic Temperature Control will regulate wash water temperatures by mixing hot and cold water to reach the proper water temperature.
7