INSTALLATION INSTRUCTIONS
ToolsandParts
Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed here.
Tools needed:
AlternateParts
Your installation may require additional parts. For information on ordering, please refer to the toll free phone numbers on the front page of the Washer/Dryer User Instructions.
If You Have | You Will Need to Buy |
■#2 Phillips and
■Adjustable wrench that opens to 1" (2.5 cm) or ⁹⁄₁₆"
■¼" nut driver or socket wrench (recommended)
■Wire stripper (for U.S. only, direct wire installations)
■Caulking gun and compound (for installing new exhaust vent)
Parts supplied:
■Level
■Wood block (for leveling)
■Ruler or measuring tape
■Knife
■Vent clamps
■Pliers
■Scissors
■Tin snips (for new vent installations)
Laundry tub or | Sump pump system (if not already |
standpipe taller than | available) |
96" (2.4 m) |
|
|
|
1" (2.5 cm) diameter | 2" (5 cm) diameter to 1" (2.5 cm) |
standpipe | diameter standpipe adapter, Part |
| Number 3363920 |
|
|
Overhead sewer | Standard 20 gal. (76 L) 34" (86.4 cm) |
| tall drain tub or utility sink and sump |
| pump (available from local plumbing |
| suppliers) |
|
|
Floor drain | Siphon break, Part Number 285320, |
| additional drain hose, Part Number |
| 285702 and connector kit, |
| Part Number 285442 |
|
|
Drain hose too short | Drain hose, Part Number 285664 and |
Remove parts package from the washer basket. Check that all parts were included.
| connector kit, Part Number 285442 |
|
|
Lint clogged drain | Drain protector, Part Number 367031 |
|
|
Water faucets | 2 longer water fill hoses: |
beyond reach of fill | 6 ft (1.8 m) Part Number 76314, |
hoses | 10 ft (3.0 m) Part Number 350008 |
AB
DE
A. Water inlet hoses (2)
B. Inlet hose flat washers (4)
C. Front leveling feet with nuts (2)
C
F
D. Shipping strap (not in parts bag. See “Remove Shipping Strap.”)
E. Drain hose
F. Silver, double wire hose clamp
Parts needed:
Check local codes, electrical supply and venting, and read “Electrical Requirements” and “Venting Requirements” before purchasing parts.
Mobile home installations require metal exhaust system hardware available for purchase from the dealer from whom you purchased your washer/dryer. For further information, please reference the “Assistance or Service” section of the Washer/Dryer User Instructions.
2