English
AUTO DRY CYCLE
1.Turn the knob to any program except “Off” to power on. The control panel will beep once and the dryer will change from “Off” to the operating status.
2.Set the cycle select dial to required auto dry cycle. The temperature level is preprogrammed. To change this setting:
•Press the “Temp” button to set a suitable drying temperature.
•There are four available drying temperature: High, Medium,
Low, No Heat.
•“Temp” in the “Heavy Duty” cycle is “High”. This can not be changed;
•“Temp” in the “Normal” cycle can be choosen from “High, Medium, Low”;
•“Temp” in the “Whites” cycle can be choosen from “High, Medium, Low”.
•“Temp” in the “Delicate” cycle is “Low”. This can not be changed.
•Press Start/Pause button.
•When starting the machine, close the door first, then press this button.
•If a pause is needed during drying, press this button. Pressing again will resume operation.
•Regardless of the dryer status (drying, pause or cool down), by turning the dial to “Off” position, the off indicator light will flash for 5 seconds and then the dryer will go into stand by mode. When machine is running, by turning the dial in any direction, the cycle will automatically turn “Off”.
Note: To change the cycle press “Start/Pause”, turn dial to new selection and press “Start/Pause” again.
21