English
TIMED DRY CYCLE
1.Turn the knob to any program except “Off” to power on. The control panel will beep once and the dryer will change from “Off” to the operating status. If Start/Pause button is not pressed five minutes after powering on, the dryer will automatically return to Off status.
2.Set the cycle select dial to Timed Dry Cycle.
3.There are 3 preprogrammed times, Timed Dry (5 Settings), Gentle Dry and Touch Up.
4.Press “Timed Dry” button to set the required drying time;
Press “Temp” button to set the required drying temperature.
In “Touch Up” cycle only a 20 minutes Timed Dry can be selected. Temp in “Touch Up” cycle is High Medium Low.
Temp in “Gentle Dry” cycle is low only.
5.When starting the machine close the door first, then press the “Start/Pause” button. If a pause is needed during drying, press this button. Pressing again will resume operation.
6.Regardless of the dryer status (drying, pause or cool down), by turning the dial to “Off” position, the “Off” indicator light will flash for 5 seconds and then go into stand by mode. When the machine is running, turn the dial in any direction, the cycle will automatically turn “Off”.
Note: To change the cycle press “Start/Pause”, turn dial to new selection and press “Start/Pause” again.
22