Key Sounds
When Key Sounds are turned on, a tone will sound every time you push the UP, DOWN and MENU keys. When you turn off Key Sounds, no tone will sound when you depress the keys.
To turn Keys Sounds on or off:
1.Press MENU, use the UP and DOWN keys to select AUDIO SETUP and press MENU. The audio menu will appear with two options: Key Sounds and Alarm Sounds.
2.Highlight the box to the left of Key Sounds and press MENU to turn on (check) or turn off (uncheck) key sounds. After choosing the desired setting, the menu will time out, taking you back to the main display.
Alarm Sounds
When an alarm is set and Alarm Sounds are turned on, you will hear a tone and see a
To turn Alarm Sounds on or off:
1.Press MENU, use the UP and DOWN keys to select AUDIO SETUP and press MENU. The audio menu will appear with two options: Key Sounds and Alarm Sounds.
2.To turn Alarm Sounds on or off, select ALARM SOUNDS from the Audio Setup menu and press MENU to turn on (check) or turn off (uncheck) Alarm Sounds. After choosing the desired setting, the menu will time out, taking you back to the main display.
System Setup Menu
On each page, the System Setup menu contains: Bus Devices, Snr Alarms, Timeout, Eng/Tank, Reset, NMEA Info, Sys Info, Eng Data, Engine Warnings, Units and Fuel Manager. The System Setup menus for Synchronizer, Engine Trim, Single Analog and Trim Tab pages also include Speed Range and Pressure Range.
Bus Devices
Bus Devices allows you to manage devices on the NMEA 2000 Network. Accessing devices from the Bus Devices list gives you access to an EP sensor's internal menu. We will cover that in more detail in Section 4: EP Configuration and Calibration.
1.Press MENU, use the UP and DOWN keys to select SYSTEM SETUP and press MENU.
2.Highlight B. DEVICES and press MENU. The Bus Devices list, a list of network devices, will appear.
20