Lowrance electronic LMF-200 manual To Customize the Fuel Manager, To Customize Trim Tabs

Page 38

Fuel Manager

The Fuel Manager page can be customized to display the following data types: GND:S (Ground Speed), Ful:F (Fuel Flow), ECO (Fuel Economy), Ful:Rm (Fuel Remaining), USD (Fuel Used), RNG (Fuel Range), USD:Tp (Trip Fuel Used), USD:S (Fuel Used Seasonal) and WTR:S (Water Speed).

To Customize the Fuel Manager Page:

1.Use the UP and DOWN keys to scroll through the pages until the Fuel Manager page is displayed.

2.Press MENU, select CUSTOMIZE and press MENU, which will open the Data menu.

3.Highlight the desired data type and press MENU. You will be directed back to the main display, where the data type you selected will be on the display.

Trim Tabs

	The Trim Tab page can be customized to display
	Trim Tab position in percentages or degrees.
	To Customize Trim Tabs:
	1. Use the UP and DOWN keys to scroll through
	the pages until the Trim Tabs page is displayed.
	2. Press MENU, select CUSTOMIZE and press MENU.
	3. The Trim Tab Detail menu will open with two	Trim Tabs page
	options: Percentage (Pct) or Degrees (Deg).	Trim Tabs page
	options: Percentage (Pct) or Degrees (Deg).

4.Select the desired unit of measure and press MENU. The Trim Tab page will show trim tab position in the unit of measure you chose.

32

Image 38

Contents LMF-200 Copyright 2006 Lowrance Electronics, Inc All rights reserved Visit our web siteTable of Contents Backlight Sync BL Sync Iii Page Introduction Page Preparation Recommended Tools and SuppliesInstallation Sequence Mounting the GaugeWiring LMF-200 cable connections Network Backbone and Network Nodes Connecting to a Nmea 2000 NetworkCompatibility Adding a Network Node Additional Network Information Up and Down keys Menu CommandsUnderstanding this Manual Menu keyBoat Setup To execute Boat SetupPages TimeoutBasic Menu Viewing Pages Page Screen Rotation OptionsPages Menu To remove a page from the display To add a page to the displayRemove AutoscrollStay Time Pop-ups SetupTo set a Pop-Up To set Stay TimeTrim Tabs Threshold set up RPM Threshold set upEngine Trim Threshold set up Pop-up ThresholdsScreen Rudder Threshold set upTo adjust Backlight BacklightContrast Audio SetupTo adjust Contrast Reverse Video Rev VideoSystem Setup Menu To set the Deep Alarm Sonar AlarmsTo set the Shallow Alarm Reset TimeoutTo reset Eng/Tank configuration To reset valuesNmea Info To access the Nmea Information screenTo access System Information screen System InformationTo set Speed Range To set Engine WarningsSpeed Range Pressure RangeTo change Speed and Distance units To set Pressure RangeUnits To change Depth units To change Temperature unitsTo change Pressure units To change GPS unitsRefill Tank Refill T Fuel SetupTo change Volume units To refill tankTo change Economy Speed Source To use Partial FillEconomy Speed Eco spd Fuel Remaining Source FRem SrcCustomizing Pages To customize the Single Digital To customize the Dual Digital To Customize the GaugeTo Customize the Fuel Manager To Customize Trim TabsEP-35 Temperature Configuration To configure EP-35 Temp SensorIf all temps configured Configuration name unavailable To unconfigure EP-35 temp sensorTo reconfigure an EP-35 temp sensor EP-10 Fuel Flow Configuration If desired configuration name availableTo configure Fuel Flow To unconfigure an EP-10 Fuel FlowTo reconfigure an EP-10 Fuel Flow If all fuel flows configured Configuration name unavailableIf configuration name available EP-15 Fluid Level Configuration Fluid Level menuTo configure EP-15 Fluid Level for Fuel To configure EP-15 Fluid Level for Oil To unconfigure EP-15 Fluid Level To reconfigure EP-15 Fluid LevelTo set a Level Warning To execute Reset commandLevel Warning Suzuki Engine Interface Configuration To configure Suzuki Engine InterfaceTo unconfigure a Suzuki Engine Interface To reconfigure a Suzuki Engine InterfaceIf all interfaces configured Configuration name unavailable Fuel Warning Fuel Flow Accuracy Calibrating EP SensorsEP-10 Fuel Flow Calibration Refill Tank To calibrate an EP-10 Fuel FlowPartial Fill Reset CalibrationTo execute Reset Calibration command EP-15 Fluid Level Calibration To execute 2-Point calibrationPoint Calibration To execute 3-Point calibrationTo execute 5-Point calibration Engine Interface Accuracy To Reset CalibrationCalibrating Fuel Flow in a Suzuki Engine Interface To calibrate a Suzuki Engine Interface Refill Tank Reset Calibration Calibrating EP-30 Trim Tabs Page Page Page Appendix Page Lowrance Electronics Full ONE-YEAR Warranty How to Obtain Service… Not toll-freeAccessory Ordering Information for all countries Visit our web site