To set Engine Warnings:
1.Press MENU, use the UP and DOWN keys to select SYSTEM SETUP and press MENU.
2.Highlight ENGINE WARNINGS and press MENU. The Engine Warnings menu will appear with up to five options, depending on the number of engines chosen during Boat Setup. The options are: All Engines, Port, Center, Starboard and Off. The default setting is All Engines.
NOTE:
If you choose All Engines, the alarm will be shown for each alarm engine alarm. If Port, Center or Starboard engines are selected, the gauge will only show warnings coming from the chosen engine. (To turn off all engine warnings, highlight OFF and press MENU. If you turn off engine alarms, no alarms will be shown for any of the engines.)
3.Highlight the desired option and press MENU. You will be taken back to the main display.
Speed Range
The Speed Range function is included in the System Setup menus of the following pages: Synchronizer, Gauge and Trim Tab. The Speed Range feature can make
To set Speed Range:
1.With the Synchronizer, Engine Trim, Gauge or Trim Tabs page on the screen, press MENU. Use the UP and DOWN keys to select SYSTEM SETUP and press MENU.
2.Highlight SPD RANGE and press MENU. The Speed Range menu will appear with three options:
3.Select the desired speed range and press MENU. You will be taken back to the main page. If you want to set speed range for other pages that support the Speed Range feature, scroll the desired page on the screen and repeat steps
Pressure Range
The Pressure Range screen is included in the System Setup menus of the following pages: Synchronizer, Gauge and Trim Tab. Pressure Range can make
24