IND: T (Indoor Temperature): displays indoor temperature.
O. Tnk: (Oil Tank): a fluid level configuration used to monitor the oil tank.
OUT: T: (Outdoor Temperature): displays outdoor temperature.
PORT: (Port Engine): the port engine will be located on the left side of the vessel.
STBD: (Starboard Engine): the starboard engine will be located on the right side of the vessel.
TRN:O:P (Transmission Oil Pressure): displays transmission oil pressure readings.
USD:S (Fuel Used Seasonal): displays tally of fuel used during a season.
USD (Fuel Used): displays fuel used since the last time fuel was added to tank.
USD:Tp (Use Trip Fuel): displays tally of fuel used during a trip.
WTR:P (Water Pressure): displays water pressure readings.
WTR:S (Water Speed): displays vessel’s speed when calculated by paddlewheel or pitot tube speed sensor.
WTR:T (Water Temperature): displays water temperature.
WtW Tnk (Waste Water also known as Gray Water): a fluid level configuration used to monitor the waste water holding tank.
62