description/installation |
| h1000 pilot |
| ||
splitting the ram drive unit |
|
|
Note: when dealing with any hydraulic system great care must be taken to ensure that a high degree of cleanliness is observed and no dirt, moisture or foreign objects are allowed to enter the system. When filling or topping up the external reservoir only use a good quality ISO 10 hydraulic oil e.g., Q8 Dynobear 10 (10cSt at 400C).
It is not possible to split the following linear drives:
ξ
type 0, type 1 and type 2 units
Comprise a combined ram/pump, reservoir and hydraulic cylinder. These units cannot be split.
type 3 units
Are supplied as split units, connected by 1m (3ft) hoses. These can be supplied with quick connect couplings and
Note: types 3 units with longer hoses are available from your dealer.
Page 24