Graco Gateway Network Communications Configuration
4.See FIG. 24. Click OK. The range of addresses will appear under the appropriate Block on the left side of the window.
NOTE: In this example, a Modbus device master communicating via TCP/IP will have direct access to Modbus registers 40002 through 40008 of the Pro- Mix 2KS.
For example, see Block 1 address line 1:
Modbus address
of ProMix 2KS.
Modbus address (command) from TCP/IP master connected to Gateway.
5. The Direction field typically should remain set to Device to G3.
FIG. 24: Block Mapping Data
20 | 312785C |