Pioneer PDR-555RW operating instructions CONTROLS, Connectors and Indicators Remote Control Unit

CONTROLS, CONNECTORS AND INDICATORS (REMOTE CONTROL UNIT)

Functions of the remote control unit

*Operations performed by buttons marked ★ can also be carried out by using buttons with the same name on the main unit. (See p. 26.)

1Record muting button (•) (★) (See p. 64.)

2 FADER button (See p. 64, 90.)

3 TRACK NO. WRITE (MANUAL) button (★)

(See p. 66.)

4 RANDOM button (See p. 90.)

5 REPEAT button (See p. 90.)

6 Stop button (7) (★)

7 Numeric buttons (1 to 10, >10)

8 Program button (PGM) (See p. 94.)

9 Program check button (CHECK) (See p. 96.) 0 Record buttons (¶ REC) (★) (See p. 52. and

54.)

NOTE:

For recording, press the 2 buttons simultaneously.

-Manual search buttons (1/¡) (★) (See p. 86.)

=Track search buttons (4/¢) (★) (See p. 86.)

~Play button (3) (★) ! Pause button (8) (★)

@ TIME button (★) (See p. 36.)

# Program clear button (CLEAR) (See p. 96.)

7Remote controllable range

÷Point the remote control unit and press its buttons.

Caution on the remote control operation

÷Remote control may be impossible if there is an obstacle between the remote control unit and main unit or if the remote control unit is operated at too great of an angle from the remote control sensor.

÷Erroneous operation may occur if strong light such as di- rect sunlight or fluorescent lamp light is incident to the remote control sensor.

÷The main unit may operate erroneously if it is used near equipment radiating infrared rays or if the infrared remote control unit of other equipment is used near the unit. On the contrary, if this remote control unit is operated near another piece of equipment which can be controlled with infrared rays, the equipment may operate erroneously.

÷Replace batteries when the remote controllable range decreases noticeably.

30

30

30

7m(23 ft)

Remote control sensor

<PRE1269> En