Indesit VIC 641 B, VIC 641 X, VIA 640 C manual Electrical connection, Fixing

Page 25

Fixing

The appliance must be installed on a perfectly level supporting surface.

Any deformities caused by improper fixing could affect the features and operation of the hob.

The thickness of the supporting surface should be taken into account when choosing the length of the screws for the fixing hooks:

30 mm thick: 23 mm screws

40 mm thick: 13 mm screws

Fix the hob as follows:

1. Use short flat-bottomed screws to fix the 4 alignment springs in the holes provided at the central point of each side of the hob.

2. Place the hob in the cavity, make sure it is in a central position and push down on the whole perimeter until the hob is stuck to the supporting surface.

3. For hobs with raised sides: After inserting the hob into its cavity, insert the 4 fixing hooks (each has its own pin) into the lower edges of the hob, using the long pointed screws to fix them in place, until the glass is stuck to the supporting surface.

￿The screws for the alignment springs must remain accessible.

￿In order to adhere to safety standards, the appliance must not come into contact with electrical parts once it has been installed.

￿All parts which ensure the safe operation of the appliance must not be removable without the aid of a tool.

Electrical connection

￿The electrical connection for the hob and for any built-in oven must be carried out separately, both for safety purposes and to make extracting the oven easier.

Single-phase connection

The hob is equipped with a pre-connected electricity supply cable, which is designed for single-phase connection. Connect the wires in accordance with the instructions given in the following table and diagrams:

Voltage and

Electrical cable

Wire connection

mains frequency

 

 

 

 

: yellow/green;

220-240V 1+N ~

 

N: the two blue wires

 

together

50 Hz

 

 

L: brown and black

 

 

 

 

together

Other types of connection

GB

If the mains supply corresponds with one of the following:

Voltage and mains frequency

400V - 2+N ~ 50 Hz

220-240V 3 ~ 50 Hz

400V 3 - N ~ 50 Hz

400V - 2+2N ~ 50 Hz

Separate the wires and connect them in accordance with the instructions given in the following table and diagrams:

Tensión tipo y

Cable eléctrico

Conexión de los cables

frecuencia de la red

 

 

400V - 2+N ~

 

: amarillo/verde;

50 Hz

 

 

 

220-240V 3 ~

 

N: los 2 cables azules juntos

 

L1: negro

50Hz

 

 

 

 

 

L2: marrón

400V 3-N~ 50Hz

 

 

 

 

: amarillo/verde;

 

 

N1: azul

400V - 2+2N ~

 

N2: azul

50 Hz

 

 

L1: negro

 

 

 

 

L2: marrón

 

 

 

Connecting the electricity supply cable to the mains

If the appliance is being connected directly to the electricity mains an omnipolar switch must be installed with a minimum opening of 3 mm between contacts.

￿The installer must ensure that the correct electrical connection has been made and that it is fully compliant with safety regulations.

Before connecting the appliance to the power supply, make sure that:

The appliance is earthed and the plug is compliant with the law.

The socket can withstand the maximum power of the appliance, which is indicated on the data plate located on the appliance itself.

The voltage falls within the range of values indicated on the data plate.

The socket is compatible with the plug of the appliance. If the socket is incompatible with the plug, ask an authorised technician to replace it. Do not use extension cords or multiple sockets.

￿Once the appliance has been installed, the power supply cable and the electrical socket must be easily accessible.

￿The cable must not be bent or compressed.

￿The cable must be checked regularly and replaced by authorised technicians only.

￿The manufacturer declines any liability should

these safety measures not be observed.

25

Image 25
Contents Istruzioni per l’uso Posizionamento InstallazioneIncasso AerazioneFissaggio Collegamento elettricoCollegamento monofase Altri tipi di collegamentoPannello di controllo Descrizione dell’apparecchioAvvio e utilizzo Blocco dei comandi IlcontaminutiSpegnimento del piano cottura Modalità demoDispositivi di sicurezza Cotturaa Fuocovivo Consigli pratici per la cotturaSicurezza generale Precauzioni e consigliSmaltimento Il piano come superficie di appoggio, né come tagliereEscludere la corrente elettrica Manutenzione e curaPulire l’apparecchio Smontare il pianoDescrizione tecnica dei modelli Mode d’emploi Positionnement InstallationAération 400V 2+N ~ 50 Hz 220-240V 3 ~ 50 Hz Raccordement électriqueTableau de bord Description de l’appareilMise en marche et utilisation Mode Démonstration demo Verrouillage des commandesLe minuteur Conseils d’utilisation de l’appareilLes sécurités Cuisson moyenne Conseils utiles pour la cuissonSécurité générale Précautions et conseilsMise au rebut UtilisationMise hors tension Nettoyage et entretienNettoyage de l’appareil Démontage de la tableDescription technique des modèles HOB Operating InstructionsPositioning Fixing Electrical connectionControl panel Description of the applianceStart-up and use Switching off the hob TimerDemo mode Practical advice on using the applianceSafety devices Practical cooking advice General safety Precautions and tipsDisposal 93/68/EEC dated 22/07/93 and subsequent amendmentsSwitching the appliance off Care and maintenanceCleaning the appliance Disassembling the hobTechnical description of the models Cooking zone Power WBedienungsanleitung L ü f t u n g AufstellungElektroanschluss Bedienfeld Beschreibung Des GerätesInbetriebsetzung und Gebrauch Sperre der Schaltelemente Die MinutenuhrAusschalten des Kochfeldes „Demo-Mode VorführmodusSicherheitsvorrichtungen Praktische Back-/Brathinweise Allgemeine Sicherheit Vorsichtsmaßregeln und HinweiseEntsorgung Abschalten Ihres Gerätes vom Stromnetz Reinigung und PflegeReinigung des Gerätes Demontage des KochfeldesTechnische Beschreibung der Modelle Manual de instrucciones Colocación InstalaciónOtros tipos de conexión Conexión eléctricaPanel de control Descripción del aparatoPuesta en funcionamiento y uso Bloqueo de los mandos El contador de minutosApagado de la encimera Modalidad demoDispositivos de seguridad Cocción a fuego Fuerte Consejos prácticos para la cocciónSeguridad general Precauciones y consejosEliminación Interrumpir el suministro de corriente ES eléctrica Mantenimiento y cuidadosLimpiar el aparato Desmontar la encimeraZonas de cocción Descripción técnica de los modelosXerox Business Services

VIA 640 C, VIC 641 X, VIC 641 B specifications

Indesit, a brand renowned for its commitment to innovation and functionality in kitchen appliances, presents a range of versatile hobs, including the Indesit VIC 641 B, VIC 641 X, and VIA 640 C. Each model merges efficiency with user-friendly features, making them ideal for modern cooking needs.

The Indesit VIC 641 B is a stylish black gas hob that combines practicality and aesthetic appeal. It features four gas burners, including a high-efficiency burner designed to deliver powerful heat for quick boiling and frying. The durable enamel pan supports provide stability for pots and pans while adding to the hob's overall longevity. Equipped with an automatic ignition system, the VIC 641 B ensures that users can easily ignite burners with one hand, enhancing safety and convenience.

On the other hand, the VIC 641 X presents a more contemporary stainless-steel finish, perfect for those who prefer a sleek, modern kitchen look. Like the VIC 641 B, it offers four gas burners but includes additional features such as a flame failure safety device, which automatically shuts off the gas supply if a flame is accidentally extinguished. This critical safety feature ensures peace of mind for families. The easy-to-clean surface and removable enamel grates allow for effortless maintenance, making the VIC 641 X a practical choice for busy cooks.

The VIA 640 C stands out with its combination of gas and electric cooking functionality, offering flexibility to cater to various cooking styles. This unique design includes a gas burner alongside an electric hot plate, allowing users to seamlessly switch between gas and electric cooking methods. This model promotes energy efficiency without compromising cooking performance. The VIA 640 C also incorporates a stylish ceramic glass surface, which is not only easy to clean but also adds an elegant touch to any kitchen.

All three models feature user-friendly controls, ensuring precision in heat management. With the inclusion of safety features, easy maintenance, and attractive designs, the Indesit VIC 641 B, VIC 641 X, and VIA 640 C stand out as excellent choices for home chefs who seek reliable performance and modern style in their kitchen appliances.