
MPCMM0002
1.0Document Organization
This document describes the operation and use of the Intel NetStructure® MPCMM0002 CMM.
The following topics are covered in this document.
Chapter 2.0, “Introduction” introduces the key features of the MPCMM0002 CMM. This chapter includes a product definition and a list of product features.
Chapter 3.0, “Getting Started” provides installation and setup information for the MPCMM0002 CMM. This chapter should be read before using the management module.
Chapter 4.0, “Module Components” describes the major components of the CMM and how the components are interconnected.
Chapter 5.0, “Mechanical Information” provides information on the critical dimensions of the CMM.
Chapter 6.0, “Backplane Considerations” identifies the IPMB routing requirements, power distribution options, and Ethernet routing information for chassis designers to build the MPCMM0002 CMM into their shelves.
Chapter 7.0, “Rear Connections” details the pinouts for the two connectors that interface with a backplane or coplanar mating board.
Chapter 8.0, “Chassis Data Modules (CDMs)” provides information on how the CMM accesses the Chassis Data Module (shelf FRU repository).
Chapter 9.0, “Front Panel” details the cable connections and LEDs on the CMM’s front panel
Chapter 10.0, “Grounding Considerations” provides information on grounding jumpers and ESD discharge features.
Chapter 11.0, “Thermals” provides information on the cooling requirements for the CMM.
Chapter 12.0, “Management Module Specifications” contains the electrical, environmental, and mechanical specifications for the CMM.
Chapter 13.0, “Guidelines for Third Party Chassis Vendors” provides a
Chapter 14.0, “Warranty Information” defines the warranty for the MPCMM0002 CMM.
Chapter 15.0, “Customer Support” provides information on reaching Intel customer support.
Chapter 16.0, “Certifications” lists the various applicable product certifications of the CMM.
Intel NetStructure® MPCMM0002 Chassis Management Module |
|
Hardware TPS | July 2007 |
8 | Order Number: |