IMPORTANT INFORMATION ABOUT LP GAS CONNECTIONS
WHAT IS A REGULATOR?
Your Weber® gas grill is equipped with a pressure regulator, which is a device to control and maintain uniform gas pressure as gas is released from the LP cylinder.
REGULATOR CONNECTIONS
Each Weber® LP regulator is designed for vapor withdrawal and is equipped with a
ANSI Z21.58. THE LP CYLINDER THAT YOU CONNECT TO THE REGULATOR MUST BE EQUIPPED WITH A COMPATIBLE TYPE 1 CONNECTION IN THE CYLINDER VALVE. This Type 1 connection allows you to make a fast and safe hookup between your Weber® gas grill and the LP cylinder.
NOTE: Gas will not flow from the cylinder unless the Type 1 coupling is fully engaged.
•The pressure regulator supplied with the Weber® gas grill must be used. This regulator is set for 11 inches of water column pressure.
•Replacement pressure regulator and hose assemblies must be those specified by Weber- Stephen Products LLC.
•Be sure the regulator is mounted with the small vent hole pointed downward so that it will not collect water. This vent should be free of dirt, grease, bugs, etc.
•The gas connections supplied with your Weber® gas appliance have been designed and tested to meet 100% of CSA and ANSI requirements.
mWARNING: Replacement LP cylinders must match the regulator connection supplied with this Weber® gas appliance.
| TYPE 1 CONNECTIVE COUPLING |
|
| ||
2 |
| 3 | 4 | 5 |
|
1 |
|
|
|
| |
|
|
|
|
| |
2 |
| 3 | 4 | 5 |
|
1 |
|
|
|
| |
|
|
|
|
| |
1 | Type 1 Valve |
| 4 | Thermally Sensitive Nut |
|
2 | Hand Wheel |
| 5 | Propane Regulator |
|
3 | External Thread |
|
|
|
|
|
|
|
| WWW.WEBER.COM® | 11 |