SIDE BURNER IGNITION & USAGE
ON THE SIDE...
To maximize your cooking space and to help you multitask, your grill was designed with a side burner. Igniting the side burner is easy. It uses the same igniter button as the main burners, but it ignites independently.
Summary lighting instructions are inside the cabinet door.
SIDE BURNER IGNITION
Lighting with the Igniter Button
Unlike the main burners, the side burner does not ignite from burner 1. Below are the steps that apply to igniting the side burner using the igniter button.
A) Open the side burner lid (1).
mDANGER
Failure to open the lid before igniting the side burner, or not waiting five minutes to allow the gas to clear if the side burner does not light, may result in an explosive
B)Check that the side burner valve is turned off by pushing side burner control knob in and turning it
clockwise until it stops (2). Turn all burners not being used to the off ( ) position by pushing all control knobs in and turning them clockwise until they stop.
C)If it is not on already, turn the LP cylinder on by SLOWLY turning the cylinder valve counterclockwise (3).
D)Push in and turn side burner control knob counterclockwise to start/high ( ) position (4).
E)Push and hold in the igniter button (5). You will hear the igniter clicking. You should see a flame.
mCAUTION: Side burner flame may be difficult to see on a bright sunny day.
mWARNING: If the side burner does not light in five seconds:
a)Turn off the side burner and main
burner control knobs and gas supply at source.
b) Wait five minutes to let the gas clear before you try again or try lighting with a match (refer to “Lighting with a Match”).
TO EXTINGUISH SIDE BURNER
Push side burner control knob in and turn it clockwise to the off ( ) position. Be sure the side burner is off and cool before closing the side burner lid.
1 |
2 |
3 |
4 |
5
20WWW.WEBER.COM®