PROGRAMMING continued
Menu Items...
To Change the Cook Time of a Product:
1.Press and hold 
for three, (3) seconds. “ENTER CODE” is displayed.
2.Using the Product buttons,
3.Press 
to enter Programming Mode. “PROGRAMMING MODE MENU ITEMS” is displayed.
4.Press
. “MENU ITEMS STANDBY” is displayed.
5.Use
and
to choose the desired Menu Item.
6.Press
to display “(MENU ITEM) COOK TIME XX:XX”
7.Use
and
to adjust the cook time.
8.Press
to save the changes.
9.Press
twice to exit.
To Turn Platen, (2-Sided), Cooking On/Off:
1.Press and hold 
for three, (3) seconds. “ENTER CODE” is displayed.
2.Using the Product buttons,
3.Press 
to enter the Programming Mode. “PROGRAMMING MODE MENU ITEMS” is displayed.
4.Press
. “MENU ITEMS STANDBY” is displayed.
5.Use
and
to choose the desired Menu Item.
6.Press 
twice to display “(MENU ITEM) UPPER PLATEN YES/NO “.
7.Use
and
to turn upper platen on or off.
8.Press
to save the changes.
9.Press
twice to exit.
To Change Upper Platen Set Temperature:
1.Press and hold 
for three, (3) seconds. “ENTER CODE” is displayed.
2.Using the Product buttons,
3.Press 
to enter the Programming Mode. “PROGRAMMING MODE MENU ITEMS” is displayed.
4.Press
. “MENU ITEMS STANDBY” is displayed.
5. Use
and
to choose the desired Menu Item.
6Press 
three, (3) times to display “(MENU ITEM) UPPER TEMP XXX” displayed in °F or °C.
7.Use 
and 
to change the set temperature to the desired value.
8.Press
to save the changes.
9.Press
twice to exit.
To Change Grill Set Temperature:
1.Press and hold 
for three, (3) seconds. “ENTER CODE” is displayed.
2.Using the Product buttons,
3.Press 
to enter the Programming Mode. “PROGRAMMING MODE MENU ITEMS” is displayed.
4.Press
. “MENU ITEMS STANDBY” is displayed.
5.Use
and
to choose the desired Menu Item.
6.Press 
four, (4) times to display “(MENU ITEM) GRILL TEMP XXX” displayed in °F or °C.
7.Use 
and 
to change the set temperature to the desired value.
8.Press
to save the changes.
9.Press
twice to exit.
To Change Product Gap Setting:
1.Press and hold 
for three, (3) seconds. “ENTER CODE” is displayed.
2.Using the Product buttons,
3.Press 
to enter the Programming Mode. “PROGRAMMING MODE MENU ITEMS” is displayed.
4.Press
. “MENU ITEMS STANDBY” is displayed.
5.Use
and
to choose the desired Menu Item.
6.Press 
five, (5) times to display “GAP XXX” displayed in inches or mm.
7.Use 
and 
to change the gap setting to the desired value.
8.Press
to save the changes.
9.Press
twice to exit.
Page 26