LINEAR ACTUATOR REPLACEMENT continued
11.Gently fit clevis clip through top of actuator shaft and cross member bar. Use pry bar to align holes.
12.Reconnect wires as shown in the photos to the right.
Part # JIBSM08 Rev.6 (08/04/09) | Page 47 |
11.Gently fit clevis clip through top of actuator shaft and cross member bar. Use pry bar to align holes.
12.Reconnect wires as shown in the photos to the right.
Part # JIBSM08 Rev.6 (08/04/09) | Page 47 |