Garland XG24-JIB, XG36-JIB Introduction, Safety, Warranty, Shipping Damage Claim Procedure

Page 7

INTRODUCTION

The Garland Xpress grill, for Jack in the Box provides a method for efficient two-sided cooking, while accommodating a variety of products. The unit will also serve as a flat grill, and meets all of Jack in the Box’s standards for safety, efficiency, and cleanliness.

Warranty

This warranty covers defects in material and workmanship under normal use providing that:

a)The equipment has not been accidentally or intentionally damaged, altered or misused.

b)The equipment is properly installed, adjusted, operated and maintained in accordance with national and local codes and in accordance with the installation instructions provided with this product.

c)The warranty serial number affixed to the appliance by Garland has not been defaced, obliterated or removed.

d)An acceptable report for any claim under this warranty is supplied to Garland.

The equipment warranty coverage remains in force for one

(1)year (parts and labor) from the date the equipment is put into operation.

The Garland Group agrees to repair or replace, at it’s option, any part that proves to be defective in material­or workmanship at no charge for the part or normal labor.

We assume no responsibility for installation, adjustments, diagnosis, or normal maintenance such as: lubrication­of springs or valves. We exclude failures caused by erratic voltage or gas supplies. We assume no responsibility for travel costs beyond 100 miles round trip, travel other

than overland, and overtime costs of repair. We exclude broken glass, paint and porcelain finish, surface rust, gasket material, ceramic material, light bulbs and fuses from normal coverage. We exclude damage or dysfunction caused by fire, flood, and like “Acts of God” that are beyond the control of The Garland Group.

The Garland Group’s liability on a claim of warranty shall not exceed the price of the material and/or service, which caused the claim. This warranty is limited and is in lieu of all other warranties, expressed or implied. The Garland Group, our employees, or our agents shall not be held liable for any claims of personal injury or consequential damage or loss. This warranty gives you specific legal rights, and you may have other rights which vary from state to state.

Shipping Damage Claim Procedure

Please note that the Garland equipment was carefully inspected and packed by skilled personnel before leaving the factory. The transportation company assumes full responsibility for safe delivery upon acceptance of the equipment.

What to do if the equipment arrives damaged:

1.File a claim immediately regardless of the extent of damage.

2.Be sure to note, "visible loss or damage," on the freight bill or express receipt and have the person making the delivery sign it.

3.Concealed loss or damage: if damage is unnoticed until the equipment is unpacked, notify the freight company immediately, (within 15 days), and file a concealed damage claim.

SAFETY

Always follow these safety precautions when operating the Xpress Grill.

•THIS GRILL MUST be operated by persons who have been given adequate training.

•THIS EQUIPMENT MUST ONLY BE OPERATED UNDER AN

APPROVED HOOD SYSTEM..

•DO NOT OPERATE THE GRILL UNLESS IT HAS BEEN COMMISSIONED (START-UP) BY A FACTORY AUTHORIZED SERVICE CENTER..

•DO NOT operate the grill without reading the operation manual.

•DO NOT operate the Xpress grill unless it has been properly installed and grounded.

•DO NOT operate the Xpress grill unless all service and access panels are in place and fastened properly.

The Garland Xpress Grill is a semi-automatic cooking appliance. The upper platen is lowered automatically, following the manual, two-handed initiation of the cooking cycle, and the upper platen is raised automatically upon completion of the cooking cycle.

Part # JIBSM08 Rev.6 (08/04/09)

Page 7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Jack in the BOX GAS Xpress GRILLS, Models XG24-JIB, XG36-JIB Table of Contents Table of Contents Dimensions and SPECIFICATIONS, XG24-JIB Model Dimensions and SPECIFICATIONS, XG36-JIB Model Plug Configuration SpecificationsIntroduction SafetyWarranty Shipping Damage Claim ProcedureSafety National Codes Requirements Unit InstallationRating Plate Location General InformationElectrical Connections Unit InstallationAccessory Kit Main Gas Inlet Appliances Equipped with CastersAccessory Kit Electrical Supply Lines Changing to a different type of gas Electrical Connection Terminal Block ConnectionGrease Bucket Ventilation and ClearanceIgniter Adjustment Burner Air AdjustmentIgniter Inspection Grill Controls Grill Controls Platen Zeroing Programming Mode System SetupLower Front Left Raise Back Right Platen ZeroingOptional Accessories Release material sheet must be replaced when Release Material InstallationNormal Operation Normal Operation Cleaning During Operation Cleaning and MaintenanceDaily Cleaning Cleaning and Maintenance Programming Modes/Menu Sequence ProgrammingProgramming To Change the Cook Time of a Product To Change Upper Platen Set TemperatureTo Change Grill Set Temperature To Change Product Gap SettingTo Change a Product Name To View Recovery Time Upper PlatenTo View Recovery Time Grill To Change Product Button,KeyAssignmentTo View the Software Number To Change temperature Units, F or CTo Change Gap Setting Display Units To View the Flash NumberTo Change Probe Calibration Grill To Change the Alarm VolumeTo Change the Key Chirp To Change Probe Calibration UpperTo Turn Extended Time On/Off To Change Platen SetTo Change Instant-On Time To Change Control TypeTo Change the Grill Function To Change the Start DelayTo Change the Alarm Mode To Turn Clean Mode On/OffTo Modify a Product Name in Library To Perform Limit Switch TestTo Change SCK Address Bi-Weekly Calibration CalibrationTo Calibrate Probe Locations CalibrationError Messages TroubleshootingLow Internal Product Temperatures Technical TroubleshootingController Displays Too Hot Technical TroubleshootingYES YES Controller displays Probe Error Upper platen is not zeroed properly Inconsistent Or Erratic Internal Product TemperatureProbable diagnosis YES Check voltage of upper limit Does Upper Limit YES Controller Displays Ignition Failure No flame at allNoyes Linear Actuator Replacement Linear Actuator Replacement JIBSM08 Rev 7 08/04/09 Contents Parts ListModel XG24-JIB Description Quantity Gas Xpress Grill Complete Exploded View Model XG24-JIBXpress Grill Actuator Gas Xpress Grill Actuator Assembly View Model XG24-JIB Xpress Grill Platen 4517022 Platen Conduit Gas Xpress Grill Platen Assembly View Model XG24-JIBXpress Grill Burner Gas Xpress Grill Burner Assembly View Model XG24-JIB Assembly View Model XG24-JIB Contactor Bracket Component BracketIgnition Module Xpress Grill Heat Sink Assembly View Model XG24-JIB Gas Xpress Grill Heat Sink Assembly View Model XG24-JIB Part List Book Released Revision HistoryREV. # Item #Right Zone Parts ListGrill Complete Assembly Description Quantity Critical Gas Xpress Grill Complete Exploded View Model XG36-JIB4520578 Grill Plate Thermocouple JIBSM08 Rev.6 08/04/09 Actuator Assembly GAS Xpress Grill Actuator Assembly View Model XG36-JIB Platen Assembly Gas Xpress Grill Platen Assembly View Model XG36-JIB Assembly View Model XG35-JIB Gas Xpress Grill Burner Assembly View Model XG36-JIB Xpress Grill Bracket Component Mounting Bracket Xpress Grill Heat Sink Assembly View Model XG36-JIB Gas Xpress Grill Heat Sink Assembly View Model XG36-JIB Description & Location Quantity Critical Gas Xpress Grill Accessories And Tools Model XG36-JIB Center Zone Right Zone Left Zone Gas Xpress Grill Gas Tubing Model XG36-JIBItem # Date Revision HistoryDiagram WiringWiring Diagram Jack in the Box Menu Items Controller Menu ItemsTime Temperature Conversion F / C Page JIBSM08 Rev.6 08/04/09
Top Page Image Contents