Panasonic CU-E9CKP5, CU-E12CKP5, CU-E15CKP5, CS-E9CKP, CS-E15CKP, CS-E12CKP manual Contents, Features

Thank you for purchasing our Panasonic Room Air Conditioner.

CONTENTS
:Features	1
:Safety Precautions	2
■ Installation Precautions
■ Operation Precautions
:Name of Each Part	3~4
■ Indoor Unit
■ Outdoor Unit
■ Accessories
■ Remote Control
:Preparation Before Operation	5
■ Indoor Unit
■ Remote Control
:How to Operate	5~6
:Setting the Timer	7
:Convenience Operation	7
■ Powerful Mode Operation
■ Quiet Mode Operation
■ Ionizer Mode Operation
:Care and Maintenance	8

■Cleaning the Indoor Unit and Remote Control

■Cleaning the Air Filter

■Cleaning the Front Panel

■Air Purifying Filters

■Pre-season Inspection

■When the Air Conditioner is Not Used for an Extended Period of Time

■Recommended Inspection

:Helpful information	9
:Energy Saving and Operation Hints	9
:Troubleshooting	10

■Call the Dealer Immediately

Note:

Before using your air conditioner, please read this operating instructions carefully and keep it for future reference.

FEATURES

Cool, quiet, comfort from Panasonic Inverter Aided air conditioner

●Illuminating Button

For your convenience to operate in the dark.

(Refer page 4)

●Automatic Operation

Sense indoor temperature to select the optimum mode.

(Refer page 5)

●Vertical / Horizontal Air Swing

Auto swing for vertical and horizontal airflow direction.

(Refer page 6)

●Quiet Mode

To provide quiet operation.

(Refer page 7)

●Ionizer Mode

Produce negative ion for fresh air.

(Refer page 7)

●Powerful Mode

Reaches the desired room temperature quickly.

(Refer page 7)

●Removable Front Panel

For quick and easy cleaning. (washable)

(Refer page 8)

●Catechin Air Purifying Filter

Filter that can trap dust, tobacco smoke and tiny particles in the room. It can also prevent growth of bacteria and viruses trapped in this filter.

(Refer page 8)

●Triple Deodorizing Filter

Absorb odours produced by wall paper, construction material and living environment.

(Refer page 8)

●Auto Restart Control

Restart the unit automatically after power failure.

(Refer page 9)

●Enviromental Friendly (For Refrigerant: R410A Model) Zero ozone depleting potential and low global warming potential by using R410A refrigerant.

!Warning

1)If the supply cord is damaged or needed to be replaced, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard.

2)Remove power plug or disconnect from the main before servicing this appliance.

3)Do not repair by yourself.

In case of malfunction of this appliance, do not repair by yourself. Contact the sales dealer or service dealer for a repair.

4)Turn off the power (Isolation from main power supply). Pull off the power plug from the receptacle, or switch off the breaker, or switch off the power disconnecting mean to isolate the equipment from the main power supply in case of an emergency.

5)The appliance is not intended for use by young children or infirm person without supervision.

Young children should be supervised to ensure that they do not play with the appliance.

!Caution

DISCONNECT THE MAIN PLUG FROM THE SUPPLY SOCKET WHEN NOT IN USE, WHERE SUPPLY CONNECTION IS VIA MAIN PLUG.

Airborne noise.

A-weighted sound pressure level of this appliance is less than 70dB (A) under the JIS C 9612 test conditions.

Maximum cooling operation 1 m from the unit

IMPORTANT

Replacement or installation of power plugs shall be performed by authorised/qualified personnel only.

The wires in this main lead are coloured in accordance with the following code:

Green and Yellow	:	Earth
Blue	:	Neutral
Brown	:	Live

“As the colours of the wires in the main lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug, proceed as follow :

The wire which is coloured green and yellow must be connected to the terminal in the plug which is marked by the letter E or by safety earth symbol ! or coloured green or green and yellow.

The wire which is coloured blue must be connected to the terminal which is marked with letter N or coloured black.

The wire which is coloured brown must be connected to the terminal which is marked with letter L or coloured red.”

1