Emerson ib-106-340cdr, oxymitterdr hazardous area in-siu oxygen probe Specifications

Instruction Manual

IB-106-340CDR Original Issue January, 2002

Hazardous Area Oxymitter DR

1-4 SPECIFICATIONS
Hazardous Area Certifications	CENELEC EEXd IIB + H2 T3
	CSA Class I, Division 1, Groups B, C, D
Probe Lengths	18 in. (457 mm)
	3 ft (0.91 m)
	6 ft (1.83 m)
Temperature Limits in Process
Measurement Area	0° to 704°C (32° to 1300°F)
	up to 1300°C (2400°F) with optional accessories
Resolution Sensitivity	0.01% O2 transmitted signal
Sensing Cell Repeatability	±0.75% of O2 reading, or 0.05% O2
System Response to Calibration Gas	Initial response in less than 3 seconds T90 in less than
	8 seconds
Resolution Sensitivity	0.01% of O2 value
Mounting and Mounting Position	Vertical or horizontal
Materials:
Probe	Wetted or welded parts - 316L stainless steel
	Non-wetted parts - 304 stainless steel, low-copper
	aluminum
Termination Housing	Low-copper aluminum
Calibration Gas Mixtures Recommended	0.4% O2, Balance N2
	8% O2, Balance N2
Calibration Gas Flow	2.5 l/m (5 scfh)
Optional Reference Air	1 l/m (2 scfh), clean, dry, instrument-quality air
	(20.95% O2), regulated to 34 kPa (5 psi), Optional
Heater Voltage	115 ±10% VAC, 50/60 Hz., 200VA
Thermocouple	Type K
Power Requirements:
Nominal	175 W
Maximum	500 W
Ambient Operating Temperature
(Junction Box)	93°C (200°F) [71°C (160°F) max
	for YEW replacement]

Fisher-Rosemount has satisfied all obligations coming from the European legislation to harmonize the product requirements in Europe.

1-6 Description and Specifications Rosemount Analytical Inc. A Division of Emerson Process Management