Mitel 5 Default Feature Codes, Administrator Feature Codes, Feature Name Code Definition Eur

Administrator Phone Guide

Default Feature Codes

Each of the station features is assigned a feature code. Using the station’s dialpad, these codes are entered to select trunks, process calls, and use special features. The following tables show default feature code values:

∙Administrator Feature Codes on page 58

∙Diagnostics Feature Codes on page 59

∙Phone Feature Codes on page 63

∙Trunk Access Codes on page 62

Administrator Feature Codes

Table 9 summarizes feature codes accessible on administrator phones only.

Table 9: Administrator Feature Codes

Feature Name	Code	Definition
	U.S. (Eur.)
Clear Network Alarm	9851	Clears network-wide alarms on every node in the network, but
		will not affect system alarms. The Clear Network Alarm feature
		code may be entered on any node in the network, but the Send
		Network Alarms flag must be set for the administrator to clear
		alarms on other nodes in the network.
Clear System Alarm	9850	Clears all local and network-wide system alarm displays on your
		node.
Diagnostics On/Off	9900 (9100)	Enables or disables system diagnostics mode to perform
		diagnostics functions such as freezing or unfreezing the
		database, printing message logs, and seizing a device for
		troubleshooting purposes.
		Because diagnostics mode affects system performance, you
		should run the diagnostics program when the system is idle.
Enable Network Day	9862	Places any or all remote nodes into day mode (you are prompted
		for the node number).
Enable Network Night	9861	Places any or all remote nodes into night mode (you are
		prompted for the node number).
Modem Disable	9867	Disables the internal modem; used in conjunction with the
		assigned extension number of the modem.
Modem Enable	9866	Enables the internal modem; used in conjunction with the
		assigned extension number of the modem.
		Page 1 of 2

58