Mitel 5 Program Station Passcode, Station passcode is used for the Remote Programming, Redial

Page 75

 

 

Reference

Table 12: Phone Feature Codes (continued)

 

 

 

Feature Name

Code

Definition

 

 

 

Program Station Passcode

392

The station passcode is used for the Remote Programming

 

 

feature. The passcode can be changed by entering the Program

 

 

Station Passcode feature code at the phone or when using the

 

 

Remote Programming feature.

 

 

 

Queue Request

6

Requests (or cancels) an automatic callback when a busy trunk or

 

 

phone becomes available.

Record-A-Call

385

If the system is programmed with a Record-A-Call application, the

 

 

phones can be programmed to use the Record-A-Call feature. It

 

 

allows users to enter a feature code whenever they want to record

 

 

an ongoing call in their designated Record-A-Call mailbox. Users

 

 

can retrieve the recorded messages later, just as they would any

 

 

other mailbox messages.

 

 

 

Redial

380

Redials the last outside phone number dialed or saved at the

 

 

phone (up to 48 digits). Also used to save numbers at phones

 

 

programmed for last number saved.

 

 

 

Redirect Call

331

Allows the phone user to route ringing outside, intercom, and

 

 

camped on calls to another phone, hunt group, or outside number.

 

 

Routing of the redirected call is still subject to trunk and toll

 

 

restrictions. This feature provides these options in addition to the

 

 

currently available options which allow the phone user to redirect

 

 

calls to Voice Mail or Do-Not-Disturb.

 

 

 

Reminder Message

305

(Not used on single line phones) The phone user can set reminder

Reminder Message Cancel

306

messages that signal the phone at specific times. Or, the user can

 

 

cancel all reminder messages for the phone.

Remote Configuration – Disable

343

Reserved for controlled introduction. Disables the Remote

 

 

Configuration feature. The VPN connection from the Remote

 

 

Proxy Server to the 5000 CP is terminated.

 

 

 

Remote Configuration – Display

347

Reserved for controlled introduction. Displays the license key ID

License Key

 

(HASP key) for the 5000 CP.

Remote Configuration – Enable

342

Reserved for controlled introduction. Enables a Remote

 

 

Configuration session. The Virtual Private Network (VPN)

 

 

connection from the 5000 CP to the Remote Proxy Server is

 

 

initiated.

 

 

 

Remote Configuration – Reset

344

Reserved for controlled introduction. Resets a Remote

 

 

Configuration session. The VPN connection from the 5000 CP to

 

 

the Remote Proxy Server is reset.

 

 

 

Remote Programming

359

Allows a user to place a phone in DND mode, forward the phone’s

 

 

calls, or change the passcode; either from another phone or

 

 

through DISA.

 

 

 

Reverse Transfer (Call Pick-Up)

4

Picks up a call ringing or holding at a phone or hunt group.

 

 

 

Review Keys

396

(Not used on single line phones) User-programmable feature

 

 

buttons and Station Speed Dial buttons can be viewed using this

 

 

feature code.

 

 

 

 

 

Page 5 of 6

 

 

 

67

Image 75
Contents RMMM=`m=`çããìåáÅ~íáçåë=mä~íÑçêã Trademarks Administrator Phone GuideFeature Name Code Eur Number of Times Dialpad Button is Pressed Dial 9811. Network Time Synchronized appearsTable of Contents Selecting Nodes for Day or Night ModeIii Internal Modem Appendix a Reference Page FåíêçÇìÅíáçå Administrator Phone Guide Overview Administrator TypesAdditional References Feature ReferencesSystem Networks and Nodes System Network CapacitiesNetwork Node or Device Capacity Multicultural English References MÜçåÉ=~åÇ=póëíÉã=Çãáåáëíê~íáçå Administrator Phone Guide Supported Languages and Dial pad Character Descriptions Phone Feature Button DifferencesPhone and System Administration IntroductionButton Custom Dial Pad Characters U.S. English and U.K. English52xx/53xx 8560/8660 8528/8568 All Others Number of Times Dial Pad Button is PressedCustom Dial Pad Characters Canadian French Phones Supporting Old Character BitmapsCustom Dial Pad Characters Japanese Phones Supporting Japanese Character BitmapsSystem Day and Night Modes Single-Node and Network Multi-Node ConfigurationsSetting a Single-Node System in Day or Night Mode Selecting Nodes for Day or Night ModeTo set the system date and time Setting the System Date and TimeSystem Date and Time Updated appears System Date and TimeSynchronizing Network Times System Speed Dial To program or change System Speed Dial numbers and namesTo delete System Speed Dial names or numbers Configuration Assistant Enabling or Disabling Other Phones as Administrator Phones To enable or disable administrator phonesStation Phone Programming Options Enabling or Disabling Attendant Phones To enable or disable Attendant phonesProgramming Extension User Names Programming Phone Toll RestrictionsTo program user names Office Name RestrictionTo program toll restrictions for specific phones Phone and System Administration Station Programming Flowchart Verify Passcode appears Entering an Administrator Phone PasscodeTo enter an administrator phone passcode System Programming OptionsTo program DND messages Changing Do-Not-Disturb DND MessagesTo change default Reminder Messages Changing Default Reminder MessagesTo change a phone extension number Changing Phone Extension NumbersSwapping Phone Extension Numbers To swap phone extension numbersPress 2 or Swap EXTS. Enter Station Extension appears System Database Programming Flowchart Individual Trunk Programming Options Programming the Trunk Answer Supervision TypeTo program the Answer Supervision Type To program Caller ID for an individual trunk Programming Caller IDTo program the Hybrid Balance Option Programming Dtmf or Dial Pulse SignallingTo program Dtmf or dial pulse signalling Programming the Hybrid Balance OptionTo assign a trunk to a different trunk group Programming Trunk Group AssignmentsTo program the Busy Trunk option Programming the Busy Trunk OptionProgramming Trunk Group Day or Night Answer Access To program trunk group Day or Night Answer AccessTrunk Group Programming Options To program trunk group Day or Night Ring-in Programming Trunk Group Day or Night Ring-inTo program trunk group toll restrictions Programming Trunk Group Toll RestrictionsTo program trunk group trunk lists Programming Trunk Group Trunk ListsTrunk Database Programming Flowchart From Previous Alarm Types AlarmsTo respond to a major alarm Network AlarmsAlarm Differences Responding to AlarmsTo use menu buttons to clear alarms Clearing AlarmsAdministrator Phone Guide To respond to a minor alarm To use the feature codes to clear alarmsIf this alarm recurs, contact service personnel SYS Alarm #11 xNNNNWhere the 5000 CP Base Server is installed Administrator phonesInternal Modem Resetting the Internal ModemTo enable/disable a modem To reset the internal modemSeizing a Device Network Group DiagnosticsRunning Network Group Diagnostics To run the Network Group DiagnosticsInvalid Board Number appears To freeze or unfreeze system history History FreezesFreezing or Unfreezing the System History Freezing or Unfreezing the Network HistoryAdministrator Phone Guide OÉÑÉêÉåÅÉ Administrator Phone Guide Administrator Troubleshooting Tips Troubleshooting TipsSystem Administrator and Provider Information Administrator Troubleshooting TipsDo-Not-Disturb Messages Administrator Phone PasscodeProgramming Planning Sheets Phone InformationReminder Messages Reference Do-Not-Disturb MessagesReminder Messages Swapped Extension Numbers Changing Station Extension NumbersSwapping Stations Station Extension NumbersTrunk Group Programming Individual Trunk ProgrammingTrunk Group Programming Individual Trunk ProgrammingFeature Name Code Definition Eur Default Feature CodesAdministrator Feature Codes Administrator Feature CodesDiagnostics Feature Codes Diagnostics Feature CodesAdministrator Phone Guide Diagnostics Feature Codes Minor Reset Diagnostic Major Reset DiagnosticMark As Leaks Diagnostic Mark As Quiescent DiagnosticTrunk Access Codes Trunk Access CodesPhone Feature Codes Phone Feature CodesFeature Name Code Definition Administrator Phone Guide Phone Feature Codes Do-Not-Disturb Cancel Reorder tone and see the Cannot Access FeatureOutside party number is enabled Do-Not-Disturb feature code halts all intercom callsFeature code can be used to toggle the feature Headset EnableHeadset Disable Feature code can be used to toggle the feature on or offCancel all reminder messages for the phone Station Passcode feature code at the phone or when usingRemote Programming feature Reminder Message CancelEnables or disables the database-programmed System Application can enable routingSwitch Keymap System Forward EnableIndex IndexReminder Messages changing

5 specifications

Mitel 5 is an advanced communication solution designed to enhance the way businesses connect and collaborate. With its rich set of features and user-centric approach, Mitel 5 stands out in the competitive landscape of unified communications. The platform integrates voice, video, messaging, and collaboration tools, making it easier for organizations to stay connected regardless of their location.

One of the key features of Mitel 5 is its flexible deployment options. Businesses can choose to implement it on-premises, in a hosted environment, or as a fully cloud-based solution, giving them the flexibility to tailor their communication strategy to their specific needs. This adaptability also allows organizations to scale their services effectively, adding or removing users as required without significant disruptions.

Mitel 5 boasts an intuitive user interface that simplifies daily operations for end-users. The platform supports a variety of devices, including desktop phones, mobile devices, and laptops, ensuring that employees can stay connected on their preferred gadgets. The mobile app is particularly noteworthy, enabling users to access key features such as making calls, sending messages, and joining video conferences seamlessly while on the go.

Another standout characteristic is its robust collaboration tools. Mitel 5 integrates video conferencing, screen sharing, and document collaboration capabilities, facilitating teamwork among remote and in-house staff alike. This makes it especially useful in today’s increasingly remote work environment, where effective collaboration is vital for success.

Security is also a major focus of Mitel 5. The platform employs advanced encryption protocols and security measures to safeguard communication and protect sensitive information. This emphasis on security provides businesses with peace of mind, enabling them to communicate freely without the fear of breaches.

Mitel 5 leverages the latest technologies, including artificial intelligence and machine learning, to enhance user experiences. Features like intelligent call routing and predictive analytics help streamline operations and improve response times to customer inquiries.

Overall, Mitel 5 stands as a comprehensive communication solution that harmonizes various aspects of business communication into one cohesive platform. From its flexible deployment options and user-friendly interface to advanced collaboration tools and robust security features, Mitel 5 empowers businesses to communicate effectively and efficiently in today’s dynamic work environment.