Mitel 5 Display Outside Party Name, Reorder tone and see the Cannot Access Feature, Mode, Audio

Page 73

 

 

Reference

Table 12: Phone Feature Codes (continued)

 

 

 

Feature Name

Code

Definition

 

 

 

Display Outside Party Name

379

(Display phones Only) When the phone user enters this feature

On/Off

 

code, while connected to a CO call that has outside party name

 

 

information, the display will toggle between the caller’s name and

 

 

number. If there is no outside party name or the Expanded CO Call

 

 

Information On Displays flag is disabled, the user will hear a burst

 

 

of reorder tone and see the CANNOT ACCESS FEATURE

 

 

display. If the Display Outside Party Name On/Off feature code is

 

 

programmed in a user programmable button with a lamp, the lamp

 

 

will be lit when the outside party name is enabled and off when the

 

 

outside party number is enabled.

 

 

 

Display Time/Date (ITP)

300

(Display phones Only) Temporarily displays the system date and

Show IP Address (SIP)

 

time, user name, and extension number during a call or when

 

 

other displays are shown.

 

 

Feature code 300 displays the IP Address of a phone if it is in SIP

 

 

mode.

 

 

 

Do-Not-Disturb

370

The Do-Not-Disturb feature code halts all intercom calls,

Do-Not-Disturb Cancel

371

transferred calls, and pages to the phone. The Cancel code

Do-Not-Disturb On/Off

372

returns the phone to normal operation. The on/off code can be

 

 

used to turn Do-Not-Disturb on or off.

 

 

 

Do-Not-Disturb Override

373

(Not used on single line phones) If enabled in the database, allows

 

 

the phone user to break through another phone’s Do-Not-Disturb

 

 

mode when placing an intercom call.

 

 

 

Dynamic Extension Express On

363

Allow the user to enable or disable the Dynamic Extension

Dynamic Extension Express Off

362

Express (formerly called Personal Call Routing) feature.

Dynamic Ext. Express On/Off

364

 

 

 

 

Dynamic Ext. Express – Handoff

388

Provides the following functions:

 

 

Push: Allows the user to push an active call from his or her main

 

 

extension to an associated destination without disconnecting

 

 

audio.

 

 

Pull: Allows the user connected to an active call on a mobile or

 

 

home phone to pull the call back to his or her main extension.

 

 

 

Enhanced Speakerphone Enable

310

(Digital telephones only) When entered at a digital telephone, this

 

 

feature code enables the enhanced speakerphone. Digital

 

 

telephones can also use the Special button + Speaker buttons.

 

 

 

Feature Key Default

395

(Not used on single line phones) Phones have user-

 

 

programmable feature buttons that can be set to enter feature

 

 

codes. This code returns the user-programmable buttons to the

 

 

database default values.

 

 

 

Group Listen

312

(Not used on single line phones) Allows a user to transmit a

 

 

conversation over the phone speaker while in handset or headset

 

 

mode.

 

 

 

Handsfree On/Off

319

(Not used on single line phones) Disables/enables the phone’s

 

 

handsfree intercom answering. Incoming intercom calls ring as

 

 

private calls if handsfree answering is disabled.

 

 

 

 

 

Page 3 of 6

 

 

 

65

Image 73
Contents RMMM=`m=`çããìåáÅ~íáçåë=mä~íÑçêã Trademarks Administrator Phone GuideFeature Name Code Eur Number of Times Dialpad Button is Pressed Dial 9811. Network Time Synchronized appearsSelecting Nodes for Day or Night Mode Table of ContentsIii Internal Modem Appendix a Reference Page FåíêçÇìÅíáçå Administrator Phone Guide Overview Administrator TypesAdditional References Feature ReferencesSystem Network Capacities System Networks and NodesNetwork Node or Device Capacity Multicultural English References MÜçåÉ=~åÇ=póëíÉã=Çãáåáëíê~íáçå Administrator Phone Guide Phone and System Administration Phone Feature Button DifferencesIntroduction Supported Languages and Dial pad Character Descriptions52xx/53xx 8560/8660 8528/8568 All Others Custom Dial Pad Characters U.S. English and U.K. EnglishNumber of Times Dial Pad Button is Pressed ButtonCustom Dial Pad Characters Canadian French Phones Supporting Old Character BitmapsCustom Dial Pad Characters Japanese Phones Supporting Japanese Character BitmapsSetting a Single-Node System in Day or Night Mode Single-Node and Network Multi-Node ConfigurationsSelecting Nodes for Day or Night Mode System Day and Night ModesSystem Date and Time Updated appears Setting the System Date and TimeSystem Date and Time To set the system date and timeSynchronizing Network Times To program or change System Speed Dial numbers and names System Speed DialTo delete System Speed Dial names or numbers Configuration Assistant To enable or disable administrator phones Enabling or Disabling Other Phones as Administrator PhonesStation Phone Programming Options Enabling or Disabling Attendant Phones To enable or disable Attendant phonesProgramming Phone Toll Restrictions Programming Extension User NamesTo program user names Office Name RestrictionTo program toll restrictions for specific phones Phone and System Administration Station Programming Flowchart To enter an administrator phone passcode Entering an Administrator Phone PasscodeSystem Programming Options Verify Passcode appearsTo program DND messages Changing Do-Not-Disturb DND MessagesTo change default Reminder Messages Changing Default Reminder MessagesTo change a phone extension number Changing Phone Extension NumbersTo swap phone extension numbers Swapping Phone Extension NumbersPress 2 or Swap EXTS. Enter Station Extension appears System Database Programming Flowchart Programming the Trunk Answer Supervision Type Individual Trunk Programming OptionsTo program the Answer Supervision Type To program Caller ID for an individual trunk Programming Caller IDTo program Dtmf or dial pulse signalling Programming Dtmf or Dial Pulse SignallingProgramming the Hybrid Balance Option To program the Hybrid Balance OptionTo assign a trunk to a different trunk group Programming Trunk Group AssignmentsTo program the Busy Trunk option Programming the Busy Trunk OptionTo program trunk group Day or Night Answer Access Programming Trunk Group Day or Night Answer AccessTrunk Group Programming Options To program trunk group Day or Night Ring-in Programming Trunk Group Day or Night Ring-inTo program trunk group toll restrictions Programming Trunk Group Toll RestrictionsTo program trunk group trunk lists Programming Trunk Group Trunk ListsTrunk Database Programming Flowchart From Previous Alarm Types AlarmsAlarm Differences Network AlarmsResponding to Alarms To respond to a major alarmAdministrator Phone Guide To respond to a minor alarm Clearing AlarmsTo use the feature codes to clear alarms To use menu buttons to clear alarmsWhere the 5000 CP Base Server is installed SYS Alarm #11 xNNNNAdministrator phones If this alarm recurs, contact service personnelTo enable/disable a modem Resetting the Internal ModemTo reset the internal modem Internal ModemRunning Network Group Diagnostics Network Group DiagnosticsTo run the Network Group Diagnostics Seizing a DeviceInvalid Board Number appears Freezing or Unfreezing the System History History FreezesFreezing or Unfreezing the Network History To freeze or unfreeze system historyAdministrator Phone Guide OÉÑÉêÉåÅÉ Administrator Phone Guide System Administrator and Provider Information Troubleshooting TipsAdministrator Troubleshooting Tips Administrator Troubleshooting TipsProgramming Planning Sheets Administrator Phone PasscodePhone Information Do-Not-Disturb MessagesReference Do-Not-Disturb Messages Reminder MessagesReminder Messages Swapping Stations Changing Station Extension NumbersStation Extension Numbers Swapped Extension NumbersTrunk Group Programming Individual Trunk ProgrammingIndividual Trunk Programming Trunk Group ProgrammingAdministrator Feature Codes Default Feature CodesAdministrator Feature Codes Feature Name Code Definition EurDiagnostics Feature Codes Diagnostics Feature CodesAdministrator Phone Guide Diagnostics Feature Codes Mark As Leaks Diagnostic Mark As Major Reset DiagnosticQuiescent Diagnostic Minor Reset DiagnosticTrunk Access Codes Trunk Access CodesPhone Feature Codes Phone Feature CodesFeature Name Code Definition Administrator Phone Guide Phone Feature Codes Outside party number is enabled Reorder tone and see the Cannot Access FeatureDo-Not-Disturb feature code halts all intercom calls Do-Not-Disturb CancelHeadset Disable Headset EnableFeature code can be used to toggle the feature on or off Feature code can be used to toggle the featureRemote Programming feature Station Passcode feature code at the phone or when usingReminder Message Cancel Cancel all reminder messages for the phoneSwitch Keymap Application can enable routingSystem Forward Enable Enables or disables the database-programmed SystemIndex IndexReminder Messages changing

5 specifications

Mitel 5 is an advanced communication solution designed to enhance the way businesses connect and collaborate. With its rich set of features and user-centric approach, Mitel 5 stands out in the competitive landscape of unified communications. The platform integrates voice, video, messaging, and collaboration tools, making it easier for organizations to stay connected regardless of their location.

One of the key features of Mitel 5 is its flexible deployment options. Businesses can choose to implement it on-premises, in a hosted environment, or as a fully cloud-based solution, giving them the flexibility to tailor their communication strategy to their specific needs. This adaptability also allows organizations to scale their services effectively, adding or removing users as required without significant disruptions.

Mitel 5 boasts an intuitive user interface that simplifies daily operations for end-users. The platform supports a variety of devices, including desktop phones, mobile devices, and laptops, ensuring that employees can stay connected on their preferred gadgets. The mobile app is particularly noteworthy, enabling users to access key features such as making calls, sending messages, and joining video conferences seamlessly while on the go.

Another standout characteristic is its robust collaboration tools. Mitel 5 integrates video conferencing, screen sharing, and document collaboration capabilities, facilitating teamwork among remote and in-house staff alike. This makes it especially useful in today’s increasingly remote work environment, where effective collaboration is vital for success.

Security is also a major focus of Mitel 5. The platform employs advanced encryption protocols and security measures to safeguard communication and protect sensitive information. This emphasis on security provides businesses with peace of mind, enabling them to communicate freely without the fear of breaches.

Mitel 5 leverages the latest technologies, including artificial intelligence and machine learning, to enhance user experiences. Features like intelligent call routing and predictive analytics help streamline operations and improve response times to customer inquiries.

Overall, Mitel 5 stands as a comprehensive communication solution that harmonizes various aspects of business communication into one cohesive platform. From its flexible deployment options and user-friendly interface to advanced collaboration tools and robust security features, Mitel 5 empowers businesses to communicate effectively and efficiently in today’s dynamic work environment.