Type Approval | Notes to Users |
|
|
Step 3: Type Approval
Toshiba Information Systems (UK), Ltd, (TIU), hereby declares that the Strata CT product complies with the requirements of the EC Directive 1999/5/EC, (aka Radio & Telecommunications Terminal Equipment directive). A manufacture’s Declaration under this Directive allows connection to the relevant Public Network Services and the right to place the Product on the market.
The Strata CT is classified as “Call Routing Apparatus” it is intended to be connected to the various Public Telecommunications Network Services for the purpose of generating and terminating “calls”. Table A2 below lists the intended purposes of all the system interfaces.
Table A2
Interface Type | Network Service |
PCOU2F/RCOU3F/RCOS3F | Analogue Loop Calling Unguarded Lines |
RPTU1F | Euro ISDN30 service. Approved to CTR 4. |
RBSU1A & RBSU2A | Euro ISDN2 service. Approved to CTR 3. |
PACU2F | Analogue 4 wire Private Circuits, uses AC15 signalling. Approved to TBR 17. |
PEMU2F | Analogue 4 wire Private Circuits, uses DC5 signalling. Approved to TBR 17. |
The system must be installed in accordance with BS6701 parts 1 and 2, the latest issue shall apply.
Toshiba Information Systems claim approval to OFTEL general variation NS/V/1235/P/100020. The information contained in this paragraph supports Toshiba’s claim:
The following features require the interconnection of 2 or more exchange lines.
♦
♦
♦
♦
Translation of
*Warning! These features can allow an Incoming callers access to an outgoing exchange line. There is an engineering programming parameter which can disable these features. In addition the DISA feature can be “password” protected. USERS SHOULD BE AWARE THAT THESE FEATURES CAN BE USED FOR FRAUDULENT PURPOSES. Please consult your supplier to ensure any necessary security measures are enabled.
28 | Strata CT ACD Supervisor November 2001 |