AT&T 7630 user manual Telephone Operation

Page 9

TELEPHONE OPERATION

At the Handset

Making a Call

1Press Pon the handset (the PHONE light goes on).

2When you hear a dial tone, dial the number.

Answering a Call

If the handset is in the base, lift the handset. The PHONE light goes on and the call is connected.

— OR —

If the handset is away from the base, press Pon the handset. The PHONE light goes on and the call is connected.

NOTE: Although ringing stops when you answer, you might not be able to hear the other party until the PHONE light goes on steadily.

Ending a Call

Press Pon the handset

— OR—

Place the handset in the base

Handset Volume Control

The handset volume can be set to three different levels. Each time you press V on the handset the level of what you hear through the handset changes. Changing this setting does not affect what the other party hears.

Flash

Press Fto activate custom-calling services such as Call Waiting or 3-Way Calling. You may have to press other buttons before or after Fas explained in the custom-calling instructions provided by your local phone service company.

Redial

The last number dialed (up to 16 digits) on this phone is stored in redial memory until you dial another number.

1Press Pand wait for the PHONE light to go on.

2When you hear a dial tone, press R.

8

7630_book.1AT&T

8

8/12/98, 6:28 PM

Image 9

Contents Part Please read Part 1 Important Product Information Contents Installation Turn answering Telephone line cord Table/Desk Installation For Wall Installation Set the dial modeCheck for dial tone Installation Telephone Operation Temporary Tone HoldVoice Security Page/IntercomPower Reserve Feature Handset LocatorRecording a Phone Conversation Storing Memory Numbers Telephone MemoryStoring a Pause in a Memory Number OR- Press MDialing Number Stored in M1 Dialing Memory NumbersReplacing a Stored Number Memory GuardSpeakerphone Volume Control Conecting to a Call With the SpeakerphoneMute Changing Channels Operating RangeSetting the Clock Speaker Volume ControlAnswering System SET-UP Turning the System On/OffAnnouncement Options Selecting Your AnnouncementRecording Your Announcement Announcement Play/Silent Feature Set-UpRing Select and Toll Saver Deleting an AnnouncementRemote Access Code Priority Call SignalAudible Message Alert Base Ringer Setting Reviewing Feature SettingsChanging the Priority Calling Code Answering Calls Answering System OperationCall Screening/Intercept Announcement BypassSaving Messages Listening to Your MessagesMessage Guard Power Fail Protection System Deleting MessagesRecording a Memo From the Cordless Handset Connecting with the Answering SystemFrom a Touch Tone Phone Voice Help MenuRemote Access Commands Playing MessagesConnect with the answering system Recording Outgoing Announcement Call ScreeningReviewing your announcement To monitor a callRecording a Message When System is Off Changing SettingsRemote ON/OFF Reviewing Settings Exit Remote AccessAudible Signals Handset Batteries Replacing the Handset Battery Pack Case of Difficulty If you hear two-beep signal when you try to use the handsetIf the phone does not work at all If you have no dial toneIf the phone does not ring when you receive a call If you hear noise or interference when using the phoneIf you hear other calls while using the phone If you hear noise in the handset and the buttons don’t workIf you have difficulty hearing messages If messages are incompleteIf CL appears in the Message Counter If your outgoing announcement isnt clearAnswering System Operation 7630WC.1AT&T 12/98, 626 PM