Normal Playback | Denon CDR-W1500 guide

4. Fade-in and fade-out recording

★It is possible to record by gradually increasing the volume (fade-in) or decreasing it (fade-out).

(1) Fade-in recording

✽Also refer to “Setup Method (5) Fade-in time setting” (Page 12).

1	Perform the procedure at “Manual recording” step 1 to 8 (Page 16).

2	Start playing the selection you want to record on the CD player, cassette deck, etc.

3	Press the fader button on the remote control unit.
	•	“Fade In” is displayed, and “FADE” flashes during the fade in operation.
	•	The recorded sound is gradually increased from a recording level of – ∞ to the set recording level in the set time.

(2) Fade-out recording

✽Also refer to “Setup Method (6) Fade-out time setting” (Page 12).

1	During recording, press the fader button on the remote control unit.
1	•	“Fade Out” is displayed, and “FADE” flashes during the fade out operation.
	•	The recorded sound is gradually decreased from the set recording level to a recording level of -– ∞ in the set time.

NOTE:

•The fade in/out recording function does not work in the synchro or copy recording modes. Record manually if you want to use the fade in/out function.

ENGLISH

12NORMAL PLAYBACK

1.Starting playback

First try playing the tracks in order.

		Select the deck to be operated.
		(Remote control unit)
					CD	CD-R
1	1	_ DUBBING _			RELAY
		NORMAL	HIGH		MODE
		A ! "		D # %		G & '
(Main unit)		1		2		3
(Main unit)		J （）�		M ＊�＋�		P , －�
		4		5		6
		S . ／�		V : ;		Y ＜＞�
PCM AUDIO TECHNOLOGY / COMPACT DISC RECORDER CDR-W1500		7		8		9
		7		8		9
		[ = ]		{ ?	}	CLEAR

													10		+10
		DUBBING		DISPLAY	TITLE /
8	9	NORMAL	HIGH	TIME SELECT	CHARACTER			TIME CLEAR	INPUT	FINALIZE 4REC	8	9
					REMOTE SENSOR										REC
						POWER	PHONES PHONES LEVEL	MULTI JOG							REC
	PLAY	STOP	PAUSE	RELAY MODE	OPEN / CLOSE	ON OFF	-	OPEN /CLOSE	MENU	PLAY	STOP	PAUSE
							-	+					6	MENU		7
	1	2	3		5			5		1	2	3		MENU
							MIN MAX	PUSH
								ENTER
													8	ENTER		9
												3	STOP	PLAY		PAUSE
													2			3	2
2		3			1			1		2	3		PROG/DIRECT CALL		1 / ALL	A - B	2
2		3			1			1		2	3		RANDOM	TIME	TITLE CHARACTER
													DISPLAY SEL . FADER INPUT			FINALIZE
1	Load the disc to be played.

•Press the PLAY button (1) to start CD play.

2	• “1”lights up and the track number and track time of the track in play appear on the display.

•Press the TIME button once, twice or three times to see: Remaining track time, total remaining time, elapsed track time.

NOTE:
•	“No	Disc” will be displayed at such times as when a disc is not loaded, the disc cannot be read properly due to
	scratches or dirt, or the disc is loaded upside down.

2. Starting playback

3	Press the stop button (2 STOP).
	•	Playback stops.

•The stop mode is set automatically once all the tracks on the disc have been played.