Epson 28-276 Table of Contents, Important Safety Instructions, Safety Guidelines Definitions

Page 2

TABLE OF CONTENTS

IMPORTANT SAFETY INSTRUCTIONS

2

TROUBLESHOOTING

21

safety guidelines - definitions

3

MAINTENANCE

24

GENERAL SAFETY RULES

4

SERVICE

24

ADDITIONAL SPECIFIC SAFETY RULES

5

ACCESSORIES

25

FUNCTIONAL DESCRIPTION

7

WARRANTY

25

CARTON CONTENTS

7

FranÇais

26

assembly

10

ESPAÑOL

50

operation

16

 

 

IMPORTANT SAFETY INSTRUCTIONS

Read all warnings and operating instructions before using any tool or equipment. When using tools or equipment, basic safety precautions should always be followed to reduce the risk of personal injury. Improper operation, maintenance or modification of tools or equipment could result in serious injury and property damage. There are certain applications for which tools and equipment are designed. Delta Machinery strongly recommends that this product NOT be modified and/or used for any application other than for which it was designed.

If you have any questions relative to its application DO NOT use the product until you have written Delta Machinery and we have advised you. Contact us online at www.deltaportercable.com or by mail at End User Services, Delta Machinery, PO Box 2468, Jackson, TN 38302-2468. In Canada,125 Mural St. Suite 300, Richmond Hill, ON, L4B 1M4)

Information regarding the safe and proper operation of this tool is available from the following sources:

•Power Tool Institute, 1300 Sumner Avenue, Cleveland, OH 44115-2851or online at www.powertoolinstitute.org

•National Safety Council, 1121 Spring Lake Drive, Itasca, IL 60143-3201

•American National Standards Institute, 25 West 43rd Street, 4 floor, New York, NY 10036 www.ansi.org - ANSI 01.1 Safety Requirements for Woodworking Machines

•U.S. Department of Labor regulations www.osha.gov

SAVE THESE INSTRUCTIONS!

SAFETY GUIDELINES - DEFINITIONS

It is important for you to read and understand this manual. The information it contains relates to protecting YOUR SAFETY and PREVENTING PROBLEMS. The symbols below are used to help you recognize this information.

Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury. Used without the safety alert symbol indicates a potentially hazardous situation which, if not avoided, may

result in property damage.

Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are:

•lead from lead-based paints,

•crystalline silica from bricks and cement and other masonry products, and

•arsenic and chromium from chemically-treated lumber.

Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, always­ wear NIOSH/ OSHA approved, properly fitting­ face mask or respi­ra­tor­ when using­ such tools.

2 - English

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Contractors Saw Safety Guidelines Definitions Table of ContentsImportant Safety Instructions General SAFETY RULES ADDITIONAL SPECIFIC SAFETY RULES SAVE THESE InstructionsGrounding Instructions Power ConnectionsMOTOR SPECIFICATIONS EXTENSION CORDS Fig. CCarton Contents Functional DescriptionModel 28-206 Enclosed Stand Parts Model 28-276 Open Stand Parts Assembly Time Estimate AssemblyAssembly Tools Required Model 28-206 Enclosed Stand AssemblyPage Model 28-276 Open Stand Assembly Page Attaching the Pulley Guards Attaching the SAW to the StandAttaching the Belt to the SAW and Motor Pulley Attaching Blade to the SAW CONNECTING MOTOR CORD TO SWITCH ASSEMBLYDisconnect the machine from the power source Table InsertTilting the table Locking the switch in the off positionStarting and stopping the saw Adjusting the table stop Adjusting blade tensionTracking the blade Vertical Adjustment of the upper Blade guide assemblyAdjusting Tightness of ANTI-DROP Screw Adjusting the upper blade guides and blade support bearing EnglishChanging Blade Speed for Model 28-206 only Adjusting lower blade guides and blade support bearingDust Port Troubleshooting Guide CUTTING CURVESRemedy Probable Cause Remedy Pointer out of adjustmentProbable Cause Probable Cause RemedyBand SAW Blades Maintenance ServiceService and Repairs AccessoriesWarranty LES Instructions Importantes DE Surete Mesures DE Sécurité DéfinitionsRègles DE Sécurité Générales Règles Spécifiques Additionnelles De Sûreté Conserver CES DirectivesInstructions DE Mise À LA Terre Raccordements ÉlectriquesSpécifications DU Moteur FrenchCordon DE Rallonge Fonctionnement Monophasé À 240 VoltsAVANT-PROPOS Description FonctionnelleContenus DE Boite Désemballage ET NettoyagePièces DU Socle Fermé DU Modèle Pièces DU Socle Ouvert DU Modèle Durée Estimée Pour L’ASSEMBLAGE AssemblageOutils Nécessaires Pour L’ASSEMBLAGE Assemblage DU Socle Fermé DU ModèleFrench Assemblage DU Socle Ouvert DU Modèle French Assemblage DE LA Scie SUR LE Socle Assemblage DES Protecteurs DE PoulieAssemblage DE LA Lame SUR LA Scie Connexion DU Cordon Moteur À L’ENSEMBLE DE L’INTERRUPTEURAssemblage DE LA Table SUR LA Scie Insert DE TableVerrouiller L’INTERRUPTEUR EN Position D’ARRÊT FonctionnementDémarrage ET Arrêt DE Scie Inclinaison DE LA TableRéglage DE LA Butée DE LA Table Réglage DE LA Tension DE LameAlignement DE LA Lame Ne jamais aligner la lame lorsque l’appareil fonctionneRéglage DU Serrage DE LA VIS DE Prévention DE Tombée Débrancher l’appareil de la source d’alimentation Goulotte À Poussière Coupe DE CourbesProblème LA Scie À Ruban Vibre Beaucoup Cause probable Problème LA Scie NE Démarre PAS Cause probable SolutionGuide DE Dépannage Problème LES Lames Cassent Cause probableLames DE Scie À Lame Ruban Problème LA Lame NE S’ALIGNE PAS Cause probableEntretien Accessoiries GarantieNinguna aplicación de otra manera que para que se diseñó Instrucciones DE Seguridad ImportantesPautas DE SEGURIDAD/DEFINICIONES Normas Generales DE Seguridad Guarde Estas Instrucciones Normas Específicas Adicionales DE SeguridadConexiones a LA Fuente DE Alimentación ESPECIFICACIONES DEL MOTORCordones DE Extensión Fig. D1Prologo Descripción FuncionalContenido DE Carton Piezas Cerradas DEL Soporte DEL Modelo Base Tornillo de cabeza troncocónica M5 x 0.8 x 10 mm LadoPiezas Abiertas DEL Soporte DEL Modelo Estimación DEL Tiempo DE Ensamblaje EnsamblajeHerramientas DE Ensamblaje Requeridas Montaje DE LA Base DE Soporte Cerrada ModeloNota Apriete libremente el hardware para el ajuste adicional Montaje DE LA Base DE Soporte Abierta Modelo DA BPage Sujeción DE LA Sierra a LA Base DE Soporte Conectar LA Agujeros DEL Protector DE LA PoleaSujeción DE LA Hoja a LA Sierra Cuerda DEL Motor QUE Conecta a LA Asamblea DE InterruptorSujeción DE LA Mesa a LA Sierra Montaje DE LA Pieza DE Insercion DE MesaBloqueando EL Interruptor EN LA Posicion DE Apagado OperaciónArrancando Y Deteniendo LA Sierra Inclinación de la tablaAjuste de la parada de la tabla Ajuste de la tensión de la láminaSeguir la lámina Ajuste Vertical del montaje superior de la guía de la láminaAjuste DE LA Tensión DEL Tornillo CON Bloqueo Reajustar Piezas CON Bloqueo CON Accesorios DE AlturaDesconecte la maquina de la fuente de energia Utilizar LA Maquina Puerto del polvoCausa probable Guia Localizacion DE FallasCorte DE Curvas RemedioRemedios Mantenga LA Máquina Limpia MantenimientoHojas DE Sierra DE Cinta Lubricación Y Protección Contra Óxido ServicioFalla EN EL Encendido Mantenimiento Y ReparacionesExcepciones AccesoriosIdentificación Delproducto Garantia Para Otras LocalidadesGarantía limitada de dos años para productos nuevos
Top Page Image Contents