Chapter 4 Installing the Cisco ADE 2130 and 2140 Series Appliance Hardware Options
Installing and Removing Memory
Installing DIMMs
To install the DIMMs:
Step 1 Review the information in the “Safety Warnings” section on page x and the “Safety Guidelines” section on page
Step 2 Power down the appliance and all external devices. Disconnect the AC power cord or DC power source and all external cables.
Step 3 Attach the antistatic wrist strap to your wrist and connect its cord to the ESD socket on the top,
Step 4 Remove the appliance cover. For instructions, see the “Removing the Cover” section on page
Figure 4-6 Installing DIMMs
DIMM B2
DIMM B1
DIMM A2
DIMM A1
DIMM C1 DIMM C2
DIMM D1 DIMM D2
5 | C |
E | 3 |
|
D4 |
1 |
A |
B2
Branch 0
Branch 1
|
|
| 231203 |
1 | Ejector tab (open) | 4 | Ejector tab (closed) |
2 | DIMM notch | 5 | DIMM outside connector edge |
3 | DIMM top connector edge |
|
|
| Cisco Application Deployment Engine (ADE) 2130 and 2140 Series Appliance Hardware Installation Guide | ||
|
|