About This Guide
Document Revision History
The following Document Revision History table records technical changes to this document. The table shows the document revision number for the change, the date of the change, and a brief summary of the change.
Revision | Date | Change Summary |
|
|
|
April 2, 2008 | Updated guide with correct banner photo, added Document | |
|
| Revision History, revised the “Attaching the Inner Slide Rails to |
|
| the Appliance” section on page |
|
| page 5, Table |
|
| page 7, and fixed inconsistencies with some figures for |
|
| and PDF versions. |
|
|
|
February 22, 2007 | Changed document to printed document from | |
|
|
|
December 17, 2007 | Initial release. | |
|
|
|
Objectives
This guide explains how to prepare your site for installation, how to install the Cisco ADE 2130 and 2140 Series appliance in an equipment rack, and how to troubleshoot and maintain the appliance. After completing the appliance installation procedures covered in this guide, you then use the appropriate publications to configure your appliance.
Warranty, service, and support information is located in the Cisco Information Packet that shipped with your appliance.
Audience
This guide is designed for personnel who install, configure, and maintain the Cisco ADE 2130 and 2140 Series appliance. To use this hardware publication, you should be familiar with internetworking equipment and cabling, and have a basic knowledge of electronic circuitry and wiring practices.
Warning Only trained and qualified personnel should be allowed to install, replace, or service this equipment.
Statement 1030
Organization
The major sections of this hardware installation guide are listed in the following table.
Cisco Application Deployment Engine (ADE) 2130 and 2140 Series Appliance Hardware Installation Guide
| viii |
| |
|
|