FIG.3
MOTOR END CAP
DUST SPOUT
RAILS
BLADE WRENCH
BEVEL STOP
OVERRIDE
BEVEL STOP SCREWS 
BEVEL
ADJUSTMENT/LOCK
HANDLE
BASE STABILIZER (NOT SHOWN)
BASE
FIG. 4
TRIGGER SWITCH
SPINDLE LOCK BUTTON
KERF PLATE
BENCH MOUNTING HOLES
OPERATING HANDLE
BLADE GUARD
ARBOR COVER
LOCK DOWN PIN
FENCE
MITER ADJUSTMENT/LOCK
HANDLE
DETENT
TRIGGER
TABLE
MITER SCALE
LIFTING
HANDLE
BELT COVER SCREW
BELT COVER
RAIL LOCK KNOB
THUMBSCREW
GROOVING STOP
FENCE ADJUSTMENT
KNOB (NOT SHOWN)
HAND HOLDS
Specifications
CAPACITY OF CUT
50° miter left, 60° miter right
48˚ bevel left and right |
|
|
| ||
|
| US Models | |||
Miter | Bevel | Max | Max | Max | Max |
____ | _____ | Height | Width | Height | Width |
______ | _____ | ______ | _____ | ||
0° | 0° | 4.7" | 12" | 4.5" | 12" |
45 L&R° | 0° | 4.7" | 8.5" | 4.5" | 8.5" |
0° | 45° L | 3.2" | 12" | 2.9" | 12" |
0° | 45° R | 1.7" | 12" | 1.7"` | 12" |
DRIVE |
|
|
|
|
|
120 Volt Motor
2200 Watts
15 Amp Motor
4000 RPM
Cut Helical Gears with Roller Bearings
60 Tooth Carbide Blade
Automatic Electric Brake
Optional Attachments/Accessories
Recommended accessories fo use with your tool are available at extra cost from you local service center. If you need any assistance regarding blades or accessories, please contact DEWALT Industrial tool co., 701 East Joppa Road, Baltimore, MD 21286 or call
WARNING: For safe operation, read instruction literature included with attachments/accessories.
MITER SAW WORKSTATION: DW723
The workstation allows you to adjust the position of your miter saw quickly and easily. It comes with a workpiece support and a length stop.
EXTENSION KIT: DW7080
Used to support long overhanging workpieces, the work support is user assembled. Your saw table is designed to accept two work supports; one on each side. One set stores conveniently under the saw table.
ADJUSTABLE LENGTH STOP: DW7051
Requires the use of one work support detailed above). It is used to make repetitive cuts of the same length from 0 to 42" (0 to 106 cm).
MATERIAL CLAMP: DW7082
This accessory is used for firmly clamping workpiece to the saw table for precision cutting.
CROWN STOP: DW7084
This accessory is used for precision cutting of crown molding.
DUST BAG: DW7053 (SOME MODELS)
The dust bag is equipped with a zipper for easy emptying.
English
5