BM 2610021316
Basic Saw Operations
Miter Cut
•A miter cut is a
•The miter scale shows the angle of the blade relative to the fence angle.
•Positive detents have been provided for fast and accurate mitering at 0°, 15°, 22.5°, 31.6° and 45° left and right.
•The crown molding detents (left and right) are at 31.6° (See Cutting Crown Molding for more infor- mation page 28).
•For precision settings at angles next to the detents, use the detent override to lock out the detent. This prevents the wedge on the detent lever from slipping back into the detent.
•The kerf inserts should be as close to the blade as possible without touching the blade (see Kerf In- serts for adjustment procedures).
follow these instructions for making your miter cut:
1.Loosen miter lock knob. Lift miter detent lever and move the saw to the desired angle, using either the detents or the miter scale. Tighten miter lock knob (Figure 35).
2.Extend the base extensions and fence on the side on which the cut will be made. (See Sliding Fence and Base Extension on page 20 & 21).
3.Properly position workpiece. Make sure work- piece is clamped firmly against the table or the fence.
! WARNING | Use clamping position that does |
| not interfere with operation. Be- |
|
fore switching on, lower head assembly to make sure clamp clears guard and head assembly.
4.Follow procedures for chop cut (see page 23).
5.Wait until blade comes to a complete stop before returning head assembly to the raised position and/or removing workpiece.
FIG. 35 | Material |
| Clamp |
| Workpiece |
Miter |
lock |
Knob |
Miter Detent
lever
Miter Detents
Scale
Bevel Cut
A “bevel cut” is a
The bevel scale is sized and positioned for easy reading. And the side bevel lock lever is to lock and unlock the various settings.
A rotating Left Bevel Stop indicator allows you to set the most common bevel stops – 0°, 33.9°, 45° and 47° Left. The 33.9° bevel stop is for cutting 38° “spring angle” crown molding flat on the table. (See Compound Cuts for more information.) (See Figure 36)
FIG. 36
33.9° left