BM 2610021316
26 | 25 | 10 |
|
27
2
9
36
1
33
8
11
12
21
FIG. 1
6
7
| 28 |
| 29 |
24 | 12 |
|
14
15
13 16
20 17
19 18
22
13.Kerf Insert – Kerf inserts can be adjusted to dif- ferent blade widths to minimize workpiece tear out.
14.Miter Detent Override – Allows detent action to be locked out allowing for adjustments to any miter angle.
15.Miter lock Knob – The miter lock knob locks the miter saw table at any desired miter angle.
16.Miter Detent lever – The lever releases the table from the detent.
17.Miter Scale/Miter pointer – The pointer rotates with the table and blade. It points to the miter scale to indicate the angle setting before a cut is made.
18.Miter Detents plate – There are ten (10) miter detent slots for fast and accurate miter cuts of com- mon angles. The position of the plate can be ad- justed to set the accuracy of its detent locations.
19.Miter Detent plate Screws – Four screws ac- cessible through holes in the miter scale. The screws are loosened when adjusting detent plate position.
20.Table – Sits in base, provides workpiece sup- port, rotates for desired miter cuts and rotates the head assembly.
21.Sliding Base Extensions – Provides working surface to support workpiece, expands to support longer materials.
22.Base Extension Clamping levers – Lock the base extensions at the desired positions.
23.Tool Mounting pads – The four corners of the saw provide areas to clamp, bolt or nail/screw the saw to a flat work surface.
24.Dust Chute – Directs sawdust up and through elbow to the dust bag.