Black & Decker FS210LS instruction manual Attach the dado head set D , to the saw arbor

2. Attach the dado head set (D) Fig. 56, to the saw arbor.

NOTE: THE OUTSIDE ARBOR FLANGE CAN NOT BE USED WITH THE DADO HEAD SET, TIGHTEN THE ARBOR NUT AGAINST THE DADO HEAD SET BODY. DO NOT LOSE THE OUTSIDE ARBOR FLANGE. IT WILL BE NEEDED WHEN REATTACHING A BLADE TO THE ARBOR.

THE ACCESSORY DADO HEAD SET TABLE INSERT (E) FIG. 56, MUST BE USED IN PLACE OF THE STANDARD TABLE INSERT.

THE BLADE GUARD AND SPLITTER ASSEMBLY CANNOT BE USED WHEN DADOING AND MUST BE REMOVED OR SWUNG TO

THE REAR OF THE SAW. AUXILIARY JIGS, FIXTURES, PUSH STICKS AND FEATHER BOARDS CAN AND SHOULD BE USED.

3.Fig. 57, shows a typical dado operation using the miter gage as a guide.

NEVER USE THE DADO HEAD IN A BEVEL POSITION.

ALWAYS INSTALL BLADE GUARD AFTER OPERATION IS COMPLETED.

E

D

Fig. 56

Fig. 57

25