Getting To Know Your Table Saw
1. POWER SWITCH
Has safety feature, which is intended to prevent accidental starting (Page 36).
2. TABLE
Provides large working surface to support workpiece.
3. BASE
Supports table saw. For additional stability, holes are provided in base to bolt the saw to a workbench or stand.
4. BLADE TILT LOCK HANDLE
Locks the tilt mechanism after the blade is adjusted to desired position.
5. TABLE EXTENSION
Provides a larger work surface for longer workpieces.
6. TABLE EXTENSION LOCK HANDLE
Allows you to lock the table extension at desired distances.
7. ELEVATION WHEEL
Elevates or lowers the blade. Also used to tilt the blade 0 to 45 degrees.
8. BLADE TILT SCALE
Shows the degree the blade is tilted.
9. RIP FENCE SCALE
Shows the distance from the blade to rip fence through a convenient viewing and magnifying window. Lower portion of scale can be used up to 13 inches. Upper portion of scale is used for cuts beyond 13 inches.
10. MITER GAUGE SCALE
Shows the degree the workpiece is being mitered.
11. RIP FENCE STORAGE
Conveniently stores rip fence when not in use.
12.
Allows you to mark and locate exactly where the blade will enter the workpiece.
13. MITER GAUGE STORAGE
Conveniently stores miter gauge when not in use.
14.BLADE STORAGE, WRENCH, & CARRYING CASE (Carrying Case is an optional accessory)
Convenient carry case which allows you to store or transport three 10” blades, hex wrench, arbor wrench, one standard pencil, and one carpenter’s pencil.
15.HEX WRENCH & STORAGE AREA
Hex wrench for removing the blade guard and convenient storage area.
16. CORD WRAP
Allows you to easily wrap up the cord so it’s out of the way when transporting or storing.
17. VACUUM HOOK-UP
Your table saw is equipped for vacuum
18. RIP FENCE
Exclusive
Templates are provided on pages 59 & 61 for making holes in the rip fence 18 for attaching a wood facing 22 when using dado head, molding head or ripping thin material. After drilling holes in the fence select a piece of smooth straight wood approx. 3/4" thick and the same size as the rip fence.
Attach it to the fence with three round head No. 12 wood screws 2" long 24 not included (Fig. 3).
FIG. 1
2
15
11
FIG. 2
22
FIG. 3
24
| 19 | 12 | 18 |
|
21 | 20 |
|
| |
| 5 | 9 | ||
|
|
6
4
13
1 8 7 3
16
14 | 16 | 17 |
| ||
|
| 24 |
25
1023
20.