Setup Mode Details
Setup Mode Details
Press 
on any screen to enter the Setup screens. If the system has a password lock, Password (Screen 16) displays. If the system is not locked (password is set to 0000), Setup Home (Screen 17) displays.
Password (Screen 16)
From any Run screen, press 
to access the pass- word screen. The Password Screen displays if a pass- word has been set. Set the password to 0000 to prevent Password (Screen 16) from displaying. See Configure 3 (Screen 20), page 44, to set or change the password.
FIG. 34. Password (Screen 16)
•Press 
to enter the password (0000 to 9999).
Press 
to move between digits. Press
to change a digit. Press 
when field is correct. Setup Home (Screen 17) displays.
•Press 
to toggle between Run Mode and Setup Mode.
•Select 
to display Run Home (Screen 1). Enter- ing an incorrect password also displays Run Home (Screen 1).
Setup Home (Screen 17)
Setup Home (Screen 17) displays if 
is selected on any screen and the system is not locked, or when a cor- rect password is entered on the Password Screen. The Setup Home screen displays the software versions of the boards in the Display Module, Advanced Fluid Con- trol Module, and the USB Module (if applicable).
Software Version:
Display Module
Fluid Control Module 
USB Module 
Configure Recipe Maintenance Calibration
FIG. 35. Setup Home (Screen 17)
•Press a soft key button to select one of the four Setup Mode screen sections:
Configure 
, Recipe 
, Maintenance 
, or
Calibration 
.
•Press 
to toggle between Run Mode and Setup Mode.
42 | 3A0868G |