Troubleshooting: Digital Scale – Model 15S only
Trouble | Probable Cause | Remedy | |
|
|
| |
Flashing digits. | Low voltage. | Replace battery. | |
|
|
| |
Locked digits. | Haphazard memory. | Take battery out, wait thirty seconds, | |
then | |||
|
| ||
|
|
| |
No display. | Poor contact of battery. | Improve battery contact. | |
|
| ||
Low voltage. | Replace battery. | ||
| |||
|
|
| |
Displays only ‘0000’. | Remove frame and adjust spring. | ||
slider signal source. | |||
|
| ||
|
|
| |
Function buttons | Distortion of springs from over- | Remove frame and adjust springs. | |
won’t work. | pressing. | ||
| |||
|
|
|
Switch Lock
To safeguard your machine from unauthorized operation and to avoid accidental starting by young children, the use of a padlock (not provided) is highly recommended.
To lock out an on/off switch (Figure 43):
1.Open the padlock.
2.Insert through holes in the start button.
3.Close the padlock.
4.Store padlock key in a safe place.
Figure 43
Optional Accessories
708816 Knives (set of 3) – Model 15S only
1791212 Knife Inserts (set of 10) – Model 15HH only 708520 DRO Retrofit Kit
Replacement Parts
Replacement parts are listed on the following pages. To order parts or reach our service department, call
26