Powermatic 15HH operating instructions Maintenance, Depth of Cut, Lubrication, Gearbox Lubricant

Page 18

Depth of Cut

The cutting depth scale is a combination inch/metric scale (Figure 33), with a cutting range from 0 to 6" (152.4mm). A manual scale is mounted directly to the front column. The model 15S planer also features a digital scale for easier, more precise depth readings.

Figure 33

The distance of upward or downward movement is controlled by the handwheel (Figure 33). Before moving the table up or down, loosen the locking handles (Figure 33). After obtaining proper table position, tighten the locking handles.

Maximum depth of cut is 3/16". A limiter (Figure

33)on the front of the head casting limits the depth of cut on full width planing under 1/8".

The digital scale should be calibrated before operating the planer. Refer to page 21.

Maintenance

Disconnect machine from power source before performing any maintenance.

Periodic or regular inspections are required to ensure that the machine is in proper adjustment, that all screws are tight, that belts are in good condition, that dust has not accumulated in the electrical enclosures, and that there are no worn or loose electrical connections.

Buildup of sawdust and other debris can cause your machine to plane inaccurately. Periodic cleaning is not only recommended but mandatory for accurate planing.

Close-fitting parts, such as the cutterhead slot and gibs, should be cleaned with a cloth or brush and non-flammable solvent, and freed from clinging foreign matter.

Remove resin and other accumulations from feed rollers and table with a soft rag and non- flammable solvent.

Periodically check all the chains for proper tension and adjust accordingly if required.

The table should be kept clean and free of rust. Some users prefer a paste wax on exposed steel and cast iron surfaces. The wax provides a layer of protection as well as reducing friction between lumber and the table, making cuts faster and smoother. Avoid any wax that contains silicone or other synthetic ingredients. These materials can find their way into lumber and can make staining and finishing difficult.

Another option is talcum powder applied with a blackboard eraser rubbed in vigorously once a week; this will fill casting pores and form a moisture barrier. This method provides a table top that is slick and allows rust rings to be easily wiped from the surface. Important also is the fact that talcum powder will not stain wood or mar finishes as some wax pickup does.

Lubrication

The bearings on the cutterhead are factory lubricated and sealed for life – no lubrication is required.

Gearbox Lubricant

The lubricant in the gear box must be replaced every 2,500 hours. Multi-purpose gear box lubricant will be suitable.

To replace the lubricant:

1.Remove the drain plug (A, Figure 34) with a 14mm wrench, and remove filler cap (B- Figure 33). Drain dirty oil thoroughly.

2.Insert and tighten the drain plug (A, Figure 34).

3.Fill with clean lubricant through hole (B, Figure 34).

4.Install and tighten filler cap (B, Figure 34).

Figure 34

18

Image 18
Contents Powermatic Part No. M-0460286Warranty and Service Warranty PeriodTable of Contents Page Page Features Specifications 15HHCrate Contents Figure UnpackingInstallation and Assembly HandwheelStarter Box Extension Tables Dust HoodElectrical Connections Belt Tension AdjustmentsExtension Cords Recommended Gauges AWG of Extension CordsPulley Alignment Table RollersCutterhead Replacing Knives Model 15S onlyReplacing or Rotating Knife Inserts Model 15HH only Model 15HH onlyWork Table Parallel to Cutterhead Know the Transmitting Rollers of Your PlanerAnti-Kickback Fingers Infeed and Outfeed Roller Spring TensionHeight of Infeed Roller, Chipbreaker Outfeed Roller Outfeed Roller Height Infeed Roller HeightChipbreaker Height Chip Deflector Feed Speed ControlStock Return Rollers Lubrication MaintenanceDepth of Cut Gearbox LubricantFigure No Functions of the Digital Scale Model 15S only Scale Alignment Establish Absolute ZeroUsing Relative Measurement Mode Clearing a Jammed BoardMore Uses Troubleshooting Performance Problems TroubleProbable Cause Remedy Troubleshooting Mechanical and Electrical Problems Examine motor starter for burned or Optional Accessories Troubleshooting Digital Scale Model 15S onlySwitch Lock Replacement PartsHead Assembly Parts List Head Assembly Index No. Part No Description Size Qty6284828 Base Assembly Parts List Base Assembly Table Assembly Parts List Table Assembly Gearbox Assembly Parts List Gearbox Assembly Cabinet Assembly Parts List Cabinet Assembly Electrical Connections Single Phase, 230 Volt Preventive Maintenance New Sanford Road De la Cepilladora de 15-pulgadas Parte Nro. M-0460286Garantía y Servicio Técnico Período de la GarantíaÍndice Conozca los Rodillos de Transmisión de su CepilladoraPage Page Características EspecificacionesDesempaque Contenidos de la Caja FiguraInstalación y Montaje ManivelaCaja de Arranque Mesas de Extensión Cubierta contra el PolvoConexiones Eléctricas Ajustes Cables de extensiónTensión de la Correa Alineación de la Polea Rodillos de MesaCabeza de Corte Sustitución de las Cuchillas Modelo 15S solamenteFigura 20 Modelo 15HH solamente Mesa de Trabajo Paralela a la Cabeza de Corte Conozca los Rodillos de Transmisión de su Cepilladora Bloqueadores AntiretrocesoAltura del Rodillo de Salida Altura del Rodillo de EntradaAltura del Rompevirutas Deflector de Virutas Control de la Velocidad de AlimentaciónRodillos de Retorno de Material Lubricación MantenimientoProfundidad de Corte Lubricante de la Caja de VelocidadesFigura Nro Funciones de la Regla Digital Modelo 15 S SolamenteAlineación de la Regla Determinación del Cero AbsolutoUso del Método de Medición Relativa Eliminando la Tabla AtascadaMás Usos Diagnóstico de Problemas Problemas de Desempeño ProblemaCausa Probable Solución Diagnóstico de Problemas Problemas Eléctricos y Mecánicos Revise todas las conexiones Seguro del Interruptor Diagnóstico de Problemas Escala Digital Modelo 15SProblema Causa Probable Solución Accesorios OpcionalesConjunto del Cabezal Lista de Partes Conjunto del Cabezal Nro. de Lista. Parte Nro Descripción Tamaño CantidadTS-1481021 Tornillo de Cabeza Hexagonal Conjunto de Base Lista de Partes Conjunto de Base Conjunto de Mesa Lista de Partes Conjunto de Mesa Conjunto de la Caja de Velocidad Lista de Partes Conjunto de la Caja de Velocidad Conjunto de Gabinete Lista de Partes Conjunto de Gabinete Conexiones Eléctricas Sist. Monofásico 230 Voltios Mantenimiento Preventivo New Sanford Road LaVergne, Tennessee Teléfono Raboteuse 15-pouces Pièce N. M-1791310Garantie et entretien Période de garantieTable des matières Page Page Caractérisques Spécifications Épaisseur maximale de rabotage poDéballage Modèle 15HH Uniquement FigureInstallation et assemblage Roue manuelleBoîte de démarrage Tables d’extension Capot antipoussièreConnexions électriques Cordons d’extension Épaisseur recommandée des rallonges électriques AWGRéglages Tension de la courroieAlignement de la poulie Rouleaux de tableRemplacement des couteaux Modèle 15S uniquement Tête de la découpeuseModèle 15HH uniquement Table de travail parallèle à la tête de la découpeuse Maîtrisez les rouleaux de transmission de votre raboteuse Doigts anti-reculTension du ressort du rouleau d’entrée et de sortie Hauteur du rouleau de sortie Hauteur du rouleau d’entréeHauteur du brise-copeaux Déflecteur de copeau Contrôle de la vitesse d’alimentationRouleaux de retour de la bille Profondeur de la coupe GraissageLubrifiant de la boîte de vitesses Page Fonction de léchelle numérique Modèle 15S UniquementAlignement de léchelle Établissez un zéro absoluUtilisation du mode de mesure relative Nettoyage dun panneau bloquéAutres usages Diagnostic des anomalies Problèmes de fonctionnement Cause possible SolutionAnomalies Diagnostic des anomalies Problèmes mécaniques et électriques Inspectez toutes les connexions Cadenas daiguillage Accessoires en optionAnomalies Cause possible Solution Pièces de rechangeTête Liste des pièces Tête ’indice N de la pièce Description Taille QtéTS-1504091 Vis de bouchon de tête de la prise de courant Dispositif du socle Liste des pièces Dispositif du socle Dispositif de la table Liste des pièces Dispositif de la table Dispositif de la boîte de vitesses Liste des pièces Dispositif de la boîte de vitesses Dispositif du coffret Liste des pièces Dispositif du coffret Connexions électriques phase unique, 230 volts Maintenance préventive New Sanford Road LaVergne, Tennessee Téléphone
Related manuals
Manual 5 pages 22.41 Kb