REFILLING THE WATER TANK
The unit can be used in the Clean Air Mode without putting water in the Water Tank. When using the Clean Air & Humidify Mode, or the Quick Clean Mode, the Water Tank should be filled with water.
1 Removetop. the Water Tank by unlatching the
2 Remove the Water Tank Cap and carefully fill the Water Tank with tap water.
•Change the water in the Water Tank every day with fresh tap water.
3After filling, securely tighten the Tank Cap.
•Check to see that there is no water leaking.
•Be sure to wipe off any excess water on the outside of the Water Tank.
•When carrying the Water Tank, hold it with both hands so that the Water Tank opening is facing up.
4Replace the Water Tank in the unit.
•The top latch will “click” in place when the Water Tank is properly installed.
CAUTION
Tank Handle
Water Tank
Humidifying
Tray
Water Tank
Tank Cap
tighten
ENGLISH
•Do not expose the unit to water. Short circuit and/or electrical shock may occur as a result.
•Do not use hot water (104ºF or 40ºC), chemical agents, aromatic substances, dirty water, or other damaging substances, deformation and/or malfunction may occur.
•Use only fresh tap water. Use of other water sources may promote the growth of mold, fun- gus and/or bacteria.